• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

crazy timing

  • Thread starter Thread starter ducatiboy06
  • Start date Start date Jul 17, 2008
D

ducatiboy06

New Member
Jun 26, 2008
5
0
0
M*******
Jul 17, 2008
#1
  • Jul 17, 2008
  • #1
I set the timing to 10 deg before TDC, put the plug back in, timing goes back to where it should be.. I let it run for a minute or 2, watching the mark on the crank, timing creeps back up to 10 deg or MORE ?????? Fresh built 306, mild port E7 heads, cobra intake, 70mm bbk trottle body, 160 lbs comp all cyl, new iac, tps, checked temp sensor,,,, haven't replaced O2 sensor or atmoshpheric one...... changed distrib with different used one.

I'm baffled
HELP PLEASE
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 17, 2008
#2
  • Jul 17, 2008
  • #2
The plug or SPOUT enables th computer to advance the timing. When you put it back in, the computer advances the timing according to input from the active sensors. It may advance from 2-6 degrees at idle.
 
D

ducatiboy06

New Member
Jun 26, 2008
5
0
0
M*******
Jul 17, 2008
#3
  • Jul 17, 2008
  • #3
after putting in the plug, the timing goes back to about 30 deg, then as the motor runs, idle slows for some reason, and the timing mark goes back to 10-12 deg btdc ??? i thought that once the comp sets it back it should stay at that spot until the motor speed/load is increased? if i rev the motor for 30-60 seconds(2- 3k rpm, timing will return back to the 30deg

another note, timing moves a bit at idle, seems a little jumpy, what would cause it to jump a few degrees on occasion ? I just cleaned the plug spoat connections, no diff

thanks
 

squeak93

15 Year Member
Jun 2, 2005
2,351
417
164
Joplin, Missouri
Jul 17, 2008
#4
  • Jul 17, 2008
  • #4
Like JR said, ur computer is making adjustments to the timing based on what ur sensors are telling it. It WILL jump around at idle quite a bit. U would really freak out if u had a pms or some way to see it while driving. Mine will see 45 at some points will under light load and crusing. When ur spout is out, u take away the computers ability to do that. This is why its called "base Timing".
 
S

Simple88GT

New Member
Mar 19, 2008
83
0
0
F-V, NC
Jul 17, 2008
#5
  • Jul 17, 2008
  • #5
Are you running an MSD, if you are with some timing lights they can pickup the Multiple spark and it will look like the timing is jumping, the best thing to do if that is the case is just use a cheap light they usually wont pick up the multiple spark, good luck
 
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
Sep 17, 2008
#6
  • Sep 17, 2008
  • #6
What is the spout? Is that the connector that plugs into the ignition module on the front of distributer?
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
478
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
X
VE Table Not Dialed? Send Me Your Datalog.
  • X-cam34
  • Feb 8, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
2K
Digital Self-tuning Forum May 1, 2026
X-cam34
X
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
Fuel 19lbs EV6 fuel injectors, what fuel pressure???
  • PonyGTrider
  • Jul 11, 2024
  • Fox 5.0 Mustang Tech
  • 6 7 8
Replies
144
Views
13K
Fox 5.0 Mustang Tech Jul 25, 2024
PonyGTrider
T
  • Locked
1990 2.3L automatic - real bad engine sputtering
  • the_steve_randolph
  • Jun 13, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 14, 2024
the_steve_randolph
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?