updated 17 July - I've gotten several request to separate stuff, I listed prices next to each item. I am open to offers.
All parts have 500 street miles on them, plus one trip to an 1/8 mile track.
Heads ($1950 shipped) - TEA CNC highports 225, 72cc chambers. Set up for solid roller. I am taking the heads to Duane Busch on 19 July for him to check out. If there is anything wrong with them I will have them fixed first. They have 3/8 push rod guide plates on them, I have the 5/16 guide plates I will include. http://www.totalengineairflow.com/p...02351w/trick-flow-225cc-cnc-ported-high-port/
Rockers ($250 shipped) are comp gold 7/16 1.6 rockers http://www.summitracing.com/parts/CCA-19044-16/
Girdle ($140 shipped) is trickflow http://www.summitracing.com/parts/TFS-51700701/
Intake ($350 shipped) is a world man-o-war (CHI commander 3.0). It is the dominator carb version. Some port work has been done. The clover leaf was taken out of the plenum and the runners matched to the 225 intake on the heads (felpro 1262R gasket). I also had meth injection set up on it. I had two nozzle holes drilled into the plenum, Duane is welding them shut. http://www.summitracing.com/parts/WRL-063415/
Lifters ($350 shipped) are comp endure x lifters http://www.summitracing.com/parts/CCA-838-16/
https://dl.dropbox.com/u/48077807/mustang sale/lifters rockers girdle.jpg
https://dl.dropbox.com/u/48077807/mustang sale/chambers.jpg
https://dl.dropbox.com/u/48077807/mustang sale/ex side.jpg
https://dl.dropbox.com/u/48077807/mustang sale/intake side.jpg
https://dl.dropbox.com/u/48077807/mustang sale/side view.jpg
https://dl.dropbox.com/u/48077807/mustang sale/top.jpg
I will add pics of the heads tomorrow hopefully when I pull them from the car. Duane has the intake, so pics of it later in the week.
will take $2800 for it all delivered. I am located in Southern Maryland if you want to see the stuff.
Would consider a built TH400.
Andrew
252-665-3721
[email protected]
All parts have 500 street miles on them, plus one trip to an 1/8 mile track.
Heads ($1950 shipped) - TEA CNC highports 225, 72cc chambers. Set up for solid roller. I am taking the heads to Duane Busch on 19 July for him to check out. If there is anything wrong with them I will have them fixed first. They have 3/8 push rod guide plates on them, I have the 5/16 guide plates I will include. http://www.totalengineairflow.com/p...02351w/trick-flow-225cc-cnc-ported-high-port/
Rockers ($250 shipped) are comp gold 7/16 1.6 rockers http://www.summitracing.com/parts/CCA-19044-16/
Girdle ($140 shipped) is trickflow http://www.summitracing.com/parts/TFS-51700701/
Intake ($350 shipped) is a world man-o-war (CHI commander 3.0). It is the dominator carb version. Some port work has been done. The clover leaf was taken out of the plenum and the runners matched to the 225 intake on the heads (felpro 1262R gasket). I also had meth injection set up on it. I had two nozzle holes drilled into the plenum, Duane is welding them shut. http://www.summitracing.com/parts/WRL-063415/
Lifters ($350 shipped) are comp endure x lifters http://www.summitracing.com/parts/CCA-838-16/
https://dl.dropbox.com/u/48077807/mustang sale/lifters rockers girdle.jpg
https://dl.dropbox.com/u/48077807/mustang sale/chambers.jpg
https://dl.dropbox.com/u/48077807/mustang sale/ex side.jpg
https://dl.dropbox.com/u/48077807/mustang sale/intake side.jpg
https://dl.dropbox.com/u/48077807/mustang sale/side view.jpg
https://dl.dropbox.com/u/48077807/mustang sale/top.jpg
I will add pics of the heads tomorrow hopefully when I pull them from the car. Duane has the intake, so pics of it later in the week.
will take $2800 for it all delivered. I am located in Southern Maryland if you want to see the stuff.
Would consider a built TH400.
Andrew
252-665-3721
[email protected]
