Do I Need These Sensors ?

PlzgoEz

New Member
Oct 9, 2006
17
0
0
I want to redo my engine compartment and get rid of the spider nest. If I remove these sensors listed, will my car run properly or not ?

EGR Sensors in the back of the left shock tower
Windshield Wiper Motor Wires
Crash Sensors
Low Oil Fluid Sensor
Low Brake Fluid Sensor
Low Coolant Sensor
Charcoal Canister In Left Inner Fenderwell
Windshield Wiper Resovior
 
The charcoal canister vent solenoid is the only item that will set a computer code. All the rest are just warning lights connected to the instrument panel.

Charcoal canister plumbing - one 3/8" tube from the bottom of the upper manifold to the rubber hose. Rubber hose connects to one side of the canister solenoid valve. Other side of the solenoid valve connects to one side of the canister. The other side of the canister connects to a rubber hose that connects to a line that goes all the way back to the gas tank. There is an electrical connector coming from the passenger side injector harness near #1 injector that plugs into the canister solenoid valve. It's purpose is to vent the gas tank. The solenoid valve opens at cruse to provide some extra fuel.

It does not weigh but a pound or so and helps richen up the cruse mixture. It draws no HP & keeps the car from smelling like gasoline in a closed garage. So with all these good things and no bad ones, why not hook it up & use it?