dynoed the stang (results)

[bill302]

dynoed the stang at funford weekend i had an auesome time it was the first big ford event i've attended.but i was very impressed with the results from my stang which is mostly stock see mods. in signature and tell me what you think.

 

[MAC'n89Blckstng]

What are the numbers? I cant read them on the sheet.

 

[1SLO306]

ur a/f is droping below 12 i would set it more close high 12's, u will get more out of that beauty

 

[1SLO306]

What are the numbers? I cant read them on the sheet.

blue= 214.70HP/282.30TQ
red= 217.73HP/ 286.63TQ

that what i can see

 

[bill302]

blue= 214.70HP/282.30TQ
red= 217.73HP/ 286.63TQ

that what i can see

thats it thanks blake89stang also how can the air/fuel be adjusted.

 

[1SLO306]

thats it thanks blake89stang also how can the air/fuel be adjusted.

ur welcome I think the tuner at a dyno shop has to do it. when i had mine dynoed my a/f was 10.8-11.1 and he told me after the first pull that if the a/f was about 2.8 or so i could bump my number up enough to tell it but they wasnt tuning there that day cause it was the first dyno day they had there. it was $20 for 4 pulls. once i get my h/c/i done ill have mine tuned to what it supose to be.

i dont know much about the tuning but the a/f should be about high 12's low 13's

 

[bill302]

thanks blake89stang,so what your saying the dyno shop is going to burn you a chip for your computer to correct the air/fuel. is there any other way to do it?

 

[Daggar]

For that little bit that you're out, you may be able to get there with just and adjustable FPR.

 

[bill302]

thanks daggar i'll check into that.

 

[25thmustang]

Nice for a Mustang dyno!

 

[Strype]

Bill! How was it?


I am going to pick up another stang soon... then I will be driving it to Steele in the next few weeks when you're going... I can't say any more- I'll PM you!

 

[Daggar]

bump so I can find this again.