C Chris6050 Founding Member Jul 14, 2000 188 0 0 Nazareth, PA Mar 2, 2004 #1 Mar 2, 2004 #1 I'm about to put a 65mm throttle body on my stang and was wondering if I need to buy an EGR plate or will the TB bolt right on to the stock one without problems? Thanks. -Chris
I'm about to put a 65mm throttle body on my stang and was wondering if I need to buy an EGR plate or will the TB bolt right on to the stock one without problems? Thanks. -Chris
bighoss88lx Founding Member Sep 6, 2002 537 0 0 San Antonio, Texas Mar 2, 2004 #2 Mar 2, 2004 #2 You will need to bore the stocker out to 65mm to make it flow correctly, but it will work.
cobrabuilder New Member Dec 4, 2003 76 0 0 Norman, OK Mar 2, 2004 #3 Mar 2, 2004 #3 You can have one of your local machine shops bore it for you and not cost much.
bighoss88lx Founding Member Sep 6, 2002 537 0 0 San Antonio, Texas Mar 2, 2004 #4 Mar 2, 2004 #4 Or use a die grinder or dremel and do it. You only have to take out 1.5mm from the inside.
C Chris6050 Founding Member Jul 14, 2000 188 0 0 Nazareth, PA Mar 2, 2004 #5 Mar 2, 2004 #5 Alright cool. Thanks guys.
