• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Egr

  • Thread starter Thread starter squeak93
  • Start date Start date Dec 1, 2007

squeak93

15 Year Member
Jun 2, 2005
2,352
418
164
Joplin, Missouri
Dec 1, 2007
#1
  • Dec 1, 2007
  • #1
Can someone explain to me the benefits or consequenses of deleting the EGR.

I am already collecting parts for a 351 swap (trick flow R-runner intake, Patriot Perf Heads, Comp CCA-CL35-250-4 cam and liters-non roller b-, and a forged bottom end.) Most likey will have to bore to a 357 (which will be no real noticable power gains). I want to know if there is any benefit to deleteing the egr as it makes the engine bay much cleaner (I am deleting the a/c as well to clean things up). This will be a weekend toy with some track time. Mostly a summer car to drive for fun and to take out to the local cruises.

Need help here as its about crunch time and I need to get my plan set in stone before I buy the wrong parts or make bad decisions based off of inexperience (my first engine build on my own, don't worry, will have experiences proven helpers to make sure I don't screw anything up).

(if this is not tech I am sorry and feel free to move to talk)

I did do a search for EGR but found absolutely nothing on this site about it. I know I remember reading in a thread about it and think it was on here but can't find it.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 1, 2007
#2
  • Dec 1, 2007
  • #2
Some basic theory to clarify how things work is in order…

The EGR shuts off at Wide Open Throttle (WOT), so it has minimal effect on performance. The addition of exhaust gas drops combustion temperature, increases gas mileage and reduces the tendency of the engine to ping. It can also reduce HC emissions by reducing fuel consumption. The primary result of EGR usage is a reduction in NOx emissions.

The EGR system has a vacuum source (line from the intake manifold) that goes to the EVR, computer operated electronic vacuum regulator. The EVR is located on the back of the passenger side shock strut tower. The computer uses RPM, Load. and some other factors to tell the EVR to pass vacuum to open the EGR valve. The EGR valve and the passages in the heads and intake manifold route exhaust gas to the EGR spacer (throttle body spacer). The EGR sensor tells the computer how far the EGR valve is open. Then computer adjusts the signal sent to the EVR to hold, increase or decrease the vacuum. The computer adds spark advance to compensate for the recirculated gases and the slower rate they burn at.




Troubleshooting:
There should be no vacuum at the EGR valve when at idle. If there is, the EVR (electronic vacuum regulator) mounted on the backside of the passenger side wheelwell is suspect. Check the vacuum line plumbing to make sure the previous owner didn’t cross the vacuum lines.

Diagram courtesy of Tmoss & Stang&2birds. (the diagram says 88 GT, but the EGR part is the same for 86-93 Mustangs)


The EGR sensor is basically a variable resistor, like the volume control on a radio. One end is 5 volt VREF power from the computer (red/orange wire). One end is computer signal ground (black/white), and the middle wire (brown/lt green) is the signal output from the EGR sensor. It is designed to always have some small voltage output from it anytime the ignition switch is the Run position. That way the computer knows the sensor & the wiring is OK. No voltage on computer pin 27 (brown/lt green wire) and the computer thinks the sensor is bad or the wire is broken and sets code 31. The voltage output can range from approximately .6-.85 volt.


EGR test procedure courtesy of cjones

to check the EGR valve:
bring the engine to normal temp.
connect a vacuum pump to the EGR Valve
apply 5in vacuum to the valve.
if engine stumbled or died then EGR Valve and passage(there is a passageway through the heads and intake) are good.
if engine did NOT stumble or die then either the EGR Valve is bad and/or the passage is blocked.
if engine stumbled, connect vacuum gauge to the hose coming off of the EGR Valve
snap throttle to 2500 RPM (remember snap the throttle don't hold it there).
did the vacuum gauge show about 2-5 in vacuum?

if not, check for manifold vacuum at the EGR vacuum valve.
if you have manifold vacuum then connect vacuum gauge to the EGR valve side of the vacuum valve and snap throttle to 2500 RPM.
should read about 2-5 in vacuum


Late Model Restoration has the Ford Racing M-12071-N302 kit with the EGR valve & sensor along with the ACT & ECT sensors for $45. See http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=M12071N302 1&comp=LRS for more details
 

squeak93

15 Year Member
Jun 2, 2005
2,352
418
164
Joplin, Missouri
Dec 1, 2007
#3
  • Dec 1, 2007
  • #3
Ok, that is exactly what I was looking for. Now my question is, (and this is a what if only as I do not know) what if the heads I have chosen do not have the egr passages on them? What then? I have no reason to believe any system on the car is not working (other than my air bag's-which do not affect any of my performance or other systems).

Again, the heads are the Patriot Perf to save some re reading.




EDIT. Smog pump was removed by prev owner and everything looks to have been blocked off correctly. O/R x pipe as well.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 1, 2007
#4
  • Dec 1, 2007
  • #4
If there are no EGR passages in the heads, then a custom tune & chip will be needed to disable the EGR function and not set a code.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Dec 1, 2007
#5
  • Dec 1, 2007
  • #5
If you are building a custom setup, i assume a custom tune will also be on tap?

If so, it will be tuned out and fuel/timing curves adjusted.



Problems arise when guys take a stock setup and rip the EGR stuff off thinking it's robbing 20HP and do more harm than good
 

squeak93

15 Year Member
Jun 2, 2005
2,352
418
164
Joplin, Missouri
Dec 1, 2007
#6
  • Dec 1, 2007
  • #6
Yes, a custom tune will be done as I know it will run with the A9P but it will not be at its best.

Now my question. I need a good tuner.

Am I best off getting a Tweecer and learning how to use it? I am pretty new to this but am more than willing/capable of learning what the parameters to everything are.

Or is this something that I need to leave to a pro tuner? The closest ones I know of are going to be in the K C, Mo area (like 3 or so hours away from me).
 
You must log in or register to reply here.

Similar threads

Engine (EGR Deleted) Solution the hotter combustion chambers?
  • PonyGTrider
  • Jan 21, 2026
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
97
Views
5K
Fox 5.0 Mustang Tech May 2, 2026
PonyGTrider
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
617
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Engine Throwing codes 94, 33, 34, 44, and sporadic engine shutoff.
  • Ryu
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
1K
Fox 5.0 Mustang Tech Sep 13, 2026
Noobz347
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?