ENGINE DYNO tommorow, guesses welcome.

[5.0 HOtrain]

Engine will be dynoed tommorow, horsepower and torque guesses welcome.

418ci, all forged w/girdle and ARP hardware. C&A zero gap rings, 11.25:1 compression, TFS "R" heads, 1.6 rockers, super victor intake, 1000cfm demon carb, 252/[email protected],110ls,.576/.576 lift custom hydro roller, crane drop in lifters, along with 1 7/8 long tubes. Let the guessing begin

 

[HO93LX302]

i'm going to guess around 490-500

 

[Grn92LX]

I'm gona guess 500-550hp. Be sure to post! Do they do any tuning at all??

Mike

 

[billetunderwear]

600 is my guess

 

[IndyBlk5.0]

537.7 =)

 

[onebdlx]

500-520

 

[eric88gt]

535

 

[5.0 HOtrain]

I'm gona guess 500-550hp. Be sure to post! Do they do any tuning at all??

Mike

After break in they re-torque the heads, change the oil, and check valve lash (dont know why, hydro, but whatever) He changes the timing and jetting, thats about all the tuning he can do. Dont worry, I'll be posting the #'s

 

[houstonstangguy]

subscribing.......and my guess is 584/580

 

[5.0 HOtrain]

Well, heres the #'s, 581hp, 539tq. Motor ran sweet, NASTY idle. Who would have thought that a 1000cfm would be close to too small, had to jet up a couple of times. Cant post #'s, will email to someone to post for me (suck at internet) file is too large.
Mike.

 

[5.0 HOtrain]

FWIW, heads,intake are out of box, and numbers are on pump gas with 30 degrees total timing.

 

[GroverDill]

hit me foo

[email protected]

 

[axeman]

sweet! one of these days i'll be building a motor and i could only dream of that kind of power.

 

[onebdlx]

 

[billetunderwear]

damn I was close! Nice numbers dude!

 

[5.0 HOtrain]

Thanx guys!!, Joe, email is on the way, thank you.

 

[GroverDill]

Congrats!

dick, my car is a pos now :/

 

[IndyBlk5.0]

wow, very impressive numbers, im really impressed by your torque numbers, would you mind how much invested you have on your particular setup? if you dont, thats fine... i just am curious... nice job on the setup!!!

 

[SmockDoiley]

Cool, everybody is getting dynoed right now. I just got mine done today and you came close to me. My numbers are at the wheels, but they estimated my flywheel to be 625 horses, and 670 ftlbs.

 

[houstonstangguy]

damn I was close! Nice numbers dude!

not as close as me!!! naturally the only thing i ever really guessed correctly at I get nothing for!!!!!!