ENGINE DYNO tommorow, guesses welcome.

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Mar 4, 2004

#1

• Mar 4, 2004

• #1

Engine will be dynoed tommorow, horsepower and torque guesses welcome.

418ci, all forged w/girdle and ARP hardware. C&A zero gap rings, 11.25:1 compression, TFS "R" heads, 1.6 rockers, super victor intake, 1000cfm demon carb, 252/262@.05,110ls,.576/.576 lift custom hydro roller, crane drop in lifters, along with 1 7/8 long tubes. Let the guessing begin

 

HO93LX302

Founding Member

Jul 7, 2002

715

0

0

Naugatuck,CT

Mar 4, 2004

#2

• Mar 4, 2004

• #2

i'm going to guess around 490-500

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

Mar 4, 2004

#3

• Mar 4, 2004

• #3

I'm gona guess 500-550hp. Be sure to post! Do they do any tuning at all??

Mike

 

billetunderwear

I've posted way more than my fair share of pointle

20+ Year Stangneter

May 14, 2002

1,148

0

36

Rohnert Park, Ca

Mar 4, 2004

#4

• Mar 4, 2004

• #4

600 is my guess

 

IndyBlk5.0

New Member

Nov 24, 2003

1,122

1

0

New Whiteland, IN

Mar 4, 2004

#5

• Mar 4, 2004

• #5

537.7 =)

 

onebdlx

New Member

Jul 8, 2003

110

0

0

Hanover Park, IL

Mar 4, 2004

#6

• Mar 4, 2004

• #6

500-520

 

E

eric88gt

Founding Member

Aug 10, 2000

163

0

16

Chisholm, MN

Mar 5, 2004

#7

• Mar 5, 2004

• #7

535

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Mar 5, 2004

#8

• Mar 5, 2004

• #8

Grn92LX said:

I'm gona guess 500-550hp. Be sure to post! Do they do any tuning at all??

Mike

Click to expand...

After break in they re-torque the heads, change the oil, and check valve lash (dont know why, hydro, but whatever) He changes the timing and jetting, thats about all the tuning he can do. Dont worry, I'll be posting the #'s

 

houstonstangguy

Founding Member

Mar 16, 2002

979

0

0

Houston, Texas

Mar 5, 2004

#9

• Mar 5, 2004

• #9

subscribing.......and my guess is 584/580

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Mar 5, 2004

#10

• Mar 5, 2004

• #10

Well, heres the #'s, 581hp, 539tq. Motor ran sweet, NASTY idle. Who would have thought that a 1000cfm would be close to too small, had to jet up a couple of times. Cant post #'s, will email to someone to post for me (suck at internet) file is too large.
Mike.

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Mar 5, 2004

#11

• Mar 5, 2004

• #11

FWIW, heads,intake are out of box, and numbers are on pump gas with 30 degrees total timing.

 

GroverDill

GoldMember

Founding Member

Aug 18, 1999

5,442

1,490

214

Demotte IN 46310

Mar 5, 2004

#12

• Mar 5, 2004

• #12

hit me foo

joe@93gt.com

 

axeman

Founding Member

Feb 9, 2001

1,348

0

36

Elizabethtown, PA

Mar 5, 2004

#13

• Mar 5, 2004

• #13

sweet! one of these days i'll be building a motor and i could only dream of that kind of power.

 

onebdlx

New Member

Jul 8, 2003

110

0

0

Hanover Park, IL

Mar 5, 2004

#14

• Mar 5, 2004

• #14

 

billetunderwear

I've posted way more than my fair share of pointle

20+ Year Stangneter

May 14, 2002

1,148

0

36

Rohnert Park, Ca

Mar 5, 2004

#15

• Mar 5, 2004

• #15

damn I was close! Nice numbers dude!

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Mar 5, 2004

#16

• Mar 5, 2004

• #16

Thanx guys!!, Joe, email is on the way, thank you.

 

GroverDill

GoldMember

Founding Member

Aug 18, 1999

5,442

1,490

214

Demotte IN 46310

Mar 5, 2004

#17

• Mar 5, 2004

• #17

Congrats!

dick, my car is a pos now :/

 

IndyBlk5.0

New Member

Nov 24, 2003

1,122

1

0

New Whiteland, IN

Mar 5, 2004

#18

• Mar 5, 2004

• #18

wow, very impressive numbers, im really impressed by your torque numbers, would you mind how much invested you have on your particular setup? if you dont, thats fine... i just am curious... nice job on the setup!!!

 

S

SmockDoiley

New Member

Jun 14, 2003

1,591

2

0

San Diego, CA

Mar 5, 2004

#19

• Mar 5, 2004

• #19

Cool, everybody is getting dynoed right now. I just got mine done today and you came close to me. My numbers are at the wheels, but they estimated my flywheel to be 625 horses, and 670 ftlbs.

 

houstonstangguy

Founding Member

Mar 16, 2002

979

0

0

Houston, Texas

Mar 5, 2004

#20

• Mar 5, 2004

• #20

billetunderwear said:

damn I was close! Nice numbers dude!

Click to expand...

not as close as me!!! naturally the only thing i ever really guessed correctly at I get nothing for!!!!!!