Esterhazy 1/8 mile drags

[Slow 85]

Who's all going? They are on Sept. 11. I REALLY hope my car will be ready. I have a guy building my engine, and so far, the crank that was in the engine before is no good. So, I found another crank, and it was no good. So the builder found me a used one that will work. Hopefully the engine gets done with enough time to get it in and ready.

 

[DELUXE MW]

I'm goin what else do you need?

 

[Slow 85]

I'm goin what else do you need?

I need a lot of help. I have to order my braided line and run that, and put my shocks in the back.
Then, once the engine is in, I'll get the cage and frame connectors in, set the coilovers, and try to break the engine in before the drags.

 

[DELUXE MW]

do you need to bite that much off before the drags? I am sure you could put the cage in after no? yikes your going to be busy

 

[DELUXE MW]

we got the Mach1 engine together its on its way to the dyno hopefully the Cleveland will produce a big number, then while the engine is away we will be mocking up the Tremec into the car and setting up clutch pedal stuff and driveshaft

 

[Slow 85]

I would really like the cage in the car before I race at all. I don't want my car to end up like my brother's. He has that greyish-white 88 Mustang GT. There was no cage in it, and now it is all bent to ****. The other stuff needs to be done before anything else.

 

[DELUXE MW]

I suppose makes sense what kind of power is it going to be makin?

 

[Slow 85]

It's just gonna be stock!!!

 

[DELUXE MW]

Right stock like mine heheheheheh what color is your driveshaft loop going to be ? remember that question?

 

[Slow 85]

Actually, to be honest, I will have Edelbrock Performer RPM heads, Vic Jr. intake, bigger carb, bored .030, 292H Comp cam, and a little bit of laughing gas. The rest of the car is..... 8.8 with 4.10 gears, beefed up T5, D&D tubular k-member, a-arms, and coilovers, 4 cyl. springs in the rear (with air bag), and hopefully a cage and subframe connectors soon. I'll also have a 4 inch cowl hood (which I didn't want, I wanted it to look stock, but it wouldn't fit under the stock hood) and big and little Centerline Convo Pros.

 

[DELUXE MW]

you'll need a cage you know how to get a hold of me if you need something

 

[Slow 85]

Actually, I don't, lol. Are you in the book in Melville?

 

[DELUXE MW]

Yup Under "Dave Oryschak Deluxe Motorworks" that's actually how they have it in the phone book 728 0131