explain stroker motors...

poneypower89 said:
So, is it possible for me to make a stroker engine without boring the cylinder walls??? What size would that be?

That all depends on the bore diameter (4.00 inches on this case), and the length of the stroke. Using the example of a 347, which is typically a .030 overbore with a 3.40in stroke, at standard bore it would be 342 (341.8 actually). To determine cubic inches use the NHRA formula: Bore x Bore x Stroke x .7854 x the number of cylinders = cubic inches of an engine.

FoxFan88 said:
so whats the point of someone spending over a grand in a stroker kit when they can get a junkyard 351 and build it up???

It's more involved than just that, unfortunately. Because of the taller deck of the 351 block, it usually requires different accessory brackets, and always needs 351 specific headers, lower intake manifold, and distributor. Plus there's always little odds and ends like a taller hood to clear the intake on the 351. Guys go with the 302 based strokers for the added displacement, but ability to retain 302 specific parts. Less headaches and expenses that way.
 
Not to mention the weight savings and generally lower fuel consumption for similar configurations. There's give and take on both sides of that particualr equation. I also like the idea getting huge HP numbers from a reatively (talking about 8 bangers here) small packages.
 
StangGT1995 said:
Isn't there only like a 50lb difference between an iron headed 302 and aluminum headed 351 though? I remember reading about the weight differences on here at one time.

I'm not sure if the difference is exactly 50 lbs but difference is not huge. The real consideration where the weight is concerned is that it's on the nose of our already nose heavy Mustangs. 50 lbs of unsprung weight on the car isn't too big of a deal so long as we can move it to the back. hehe
 
"Unsprung" weight is actually a bit of a misnomer from a physics perspective -- but it is the term that is used. However, you're right -- the engine isn't 'unsprung'.

The 351-based motor is gonna weigh anywhere from 75-100 lbs. more than a 302 with similar heads (cast iron or Aluminum). Check out the shipping weights on FRPP's crate engines....351 block is bigger/heavier; as is the rotating assembly. So one benefit of a stroker is that you can have similar displacement (347/351) and power/torque in a 302-based package that weighs significantly less than a 351-based package.

Here's a great link that explains some of the pros and cons of different strokes/bores/rod lengths. http://www.victorylibrary.com/mopar/rod-tech-c.htm
 
Michael Yount said:
"Unsprung" weight is actually a bit of a misnomer from a physics perspective -- but it is the term that is used. However, you're right -- the engine isn't 'unsprung'.

The 351-based motor is gonna weigh anywhere from 75-100 lbs. more than a 302 with similar heads (cast iron or Aluminum). Check out the shipping weights on FRPP's crate engines....351 block is bigger/heavier; as is the rotating assembly. So one benefit of a stroker is that you can have similar displacement (347/351) and power/torque in a 302-based package that weighs significantly less than a 351-based package.

Here's a great link that explains some of the pros and cons of different strokes/bores/rod lengths. http://www.victorylibrary.com/mopar/rod-tech-c.htm

Yea lol,you can pick up a 302 block and your arms will be a little strained.You pick up a 351W block and hope you didnt throw your back out.
 
A stock block only weighs about 130lbs, a DART weighs a little over 160 and a Man-O-War weighs in at 225.

I can toss a stock 302 block around but damn that Man-O-War was heavy to lift into the back on my 8" lifted F-150..lol

I put a LT4 block and assembly int he back of my truck last night, it was one heavy ****** as well, no wonder those Chevy blocks take some much power.

Andy, I moved your little weight around last night :D
 
Rick 91GT said:
A stock block only weighs about 130lbs, a DART weighs a little over 160 and a Man-O-War weighs in at 225.

I can toss a stock 302 block around but damn that Man-O-War was heavy to lift into the back on my 8" lifted F-150..lol

I put a LT4 block and assembly int he back of my truck last night, it was one heavy ****** as well, no wonder those Chevy blocks take some much power.

Andy, I moved your little weight around last night :D

LOL... does it hold your doors open well? I should be able to get moving on that project again shortly after our vacation is over. Life is gettin in the way of the build.:damnit:
 
Daggar said:
LOL... does it hold your doors open well? I should be able to get moving on that project again shortly after our vacation is over. Life is gettin in the way of the build.:damnit:

hehe..yeah my wedding post poned my lil monster but it was worth it:cheers:

Actually it's under my bench out of the way.