• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

fine tuning--injector timing tables

  • Thread starter Thread starter Blackened302
  • Start date Start date Oct 20, 2007
Prev
  • 1
  • 2
First Prev 2 of 2

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Oct 22, 2007
#21
  • Oct 22, 2007
  • #21
interesting... yea, the stock values for the Inj Timing table is 300 for all the cells... i hadn't considering doing what you mentioned--i'll give it a shot, thanks!
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Oct 22, 2007
#22
  • Oct 22, 2007
  • #22
Methodical said:
Punisher it's been awhile since I worked with the injector timing and I don't recall which one I used, but I used the settings that generated all the same numbers, i.e. 372, for all cells. I think it was "End" and "TDC". Since it generated all the same numbers I figured my settings was correct and I was on the right path since the original J4J1 tune had all 300s in the table in its tune.

The great thing is you can run it as many times as you want to see which is the right one.
Click to expand...

372 for all cells ... You Say

I just looked at mine and all of em are 392

Say Al ... Have you noticed over the past year or so many peeps use
different values a good bit of the time

Its been so long since I did all that
I forget how I arrived at that value
but
It was W A Y before EA had hit the scene

Seems like it was one of those Excel spreadsheet thingies that could
be downloaded from the old Yahoo Tweecer Groups site.
however
I do remember a few things about the change

The idle was noticeably more stable
thus
A good amount of radicalness was removed from the cam lope
which was much welcomed

Each pulse was more pronounced at idle and believe it or not

You could stick your hand next to the pipe and feel the difference
between the stock 300 value and new value

Seems like I varied the values up and down a bit
with no noticeable changes

Grady
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Oct 22, 2007
#23
  • Oct 22, 2007
  • #23
alright, got my tps issue taken care of so now i can get back to this.


i never thought about setting all the values in the table to the same #. i tried getting EA to calculate teh same number for all the cells, but no combination i tried in the graphic below achieved it.




anyone care to take a stab at it using one of my datalogs from one of my previous posts?
 

Attachments

  • eainjectortimingtables.webp
    7.3 KB · Views: 223

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Oct 22, 2007
#24
  • Oct 22, 2007
  • #24
Paul

I did not mean to imply all values being the same is the correct way

Just wanted to make that clear

btw ... what was the prob with the high tps values

Grady
 

blksn955.o

Founding Member
Mar 15, 2002
3,263
0
66
st.louis mo 314
Oct 22, 2007
#25
  • Oct 22, 2007
  • #25
I do remember a low rpm/idle area being diff. to offset the time delay from the lifters not fully being pumped up at low rpm/idle.
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Oct 22, 2007
#26
  • Oct 22, 2007
  • #26
yeah, i was reading about the lifter thing in the EA help file. interesting stuff--i, in my noobness, would've never considered that.

Grady: oh yeah, i know. i thought it was interesting that Methodical mentioned it--it is true... stock j4j1 values are all 300.. wonder if something like that (having the same value all across the table) will work in my case..

the TPS was shot.. a new one fixed the problem.
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Nov 3, 2007
#27
  • Nov 3, 2007
  • #27
so i'm still working on this and have a couple new tunes to try (same scalar modifications, just different Injector Timing table values), but was reviewing the thread and starting thinking about the *single value* (300 in the stock j4j1 injector timing table) thing...

since my cam is split duration (or whatever.. ), i don't know how that would work out, but i figure it's worth a shot.

anyone of you guys running a single number all across the board? if so, how did you calculate that number?
 

Methodical

15 Year Member
Dec 1, 2003
1,192
11
59
Clinton, MD
Nov 9, 2007
#28
  • Nov 9, 2007
  • #28
Punisher302 said:
so i'm still working on this and have a couple new tunes to try (same scalar modifications, just different Injector Timing table values), but was reviewing the thread and starting thinking about the *single value* (300 in the stock j4j1 injector timing table) thing...

since my cam is split duration (or whatever.. ), i don't know how that would work out, but i figure it's worth a shot.

anyone of you guys running a single number all across the board? if so, how did you calculate that number?
Click to expand...


I have all the same numbers in the cells but I will have to check to see which settings got it for me. It's been over 2 years now since I've been TwEECing - time flies.

You can play with all the settings to see which one produces the same numbers using the same datalog because I think only one will give those results, while the others will generate various numbers. No need to redo a datalog. Just experiment with the different setting. Make sure you input all the correct values of your cam. By the way, I have a split duration cam also.
 

Methodical

15 Year Member
Dec 1, 2003
1,192
11
59
Clinton, MD
Nov 9, 2007
#29
  • Nov 9, 2007
  • #29
final5-0 said:
372 for all cells ... You Say

I just looked at mine and all of em are 392

Say Al ... Have you noticed over the past year or so many peeps use
different values a good bit of the time ...

Grady
Click to expand...


Sorry for the late reply. I didn't realize I had not subscribed to the this thread. But to answer your question - Yes. And it did make the idle seem smoother. Maybe it was just a figment of my imagnination . But the exhaust seem to pop better or something.
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Nov 9, 2007
#30
  • Nov 9, 2007
  • #30
thanks for the reply, man.

one of those new tunes worked out well with some help from Wes--he suggested i play with the lower 4 rows of the injector timing table and/or add/remove timing at the lower rows. the timing idea didn't help, but tinkering w/ the lower levels of the injector timing table did--idle is super smooth now at 900rpm.

i still want to try out the single value across the board, though. when i get home, i'm gonna mess w/ EA to see if i can manage to get the same #'s across the table.. though, i have messed w/ it before and haven't managed to.

is there a way of calculating a # manually?
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Nov 9, 2007
#31
  • Nov 9, 2007
  • #31
alright--tried getting the same # across the board using all the combinations of different settings (in Cam Specs tab in EA) with no luck.. am i missing something, or is this going to be totally impossible?

fwiw, i'm running the Comp FW NX282HR-14 cam.
 

blksn955.o

Founding Member
Mar 15, 2002
3,263
0
66
st.louis mo 314
Nov 9, 2007
#32
  • Nov 9, 2007
  • #32
I dont know if 1 number for ALL cells will be fine tuned for the combo.

At idle with less lifter pump up (valve lazy) the inj. will need to to fire at a diff. time to make up for this.

Off idle and cruise things would be more "like" for most of this area one would think.

WOT - there is SOO much theory and talk about specific time to fire, search on the eec forums and you will see some REALLY smart guys going nuts on the topic.

Add to that the cam change. Stock Ford cams are "straight" patt. cams or have the same numbers int. and exh. Alot of the aftmarket cams are "split" pattern cams and fit a specific rpm range with diff. idle and power making profiles. I think with any "fine" tuning it would lead to at least 3 sets of number. It sounds like your getting the idle numbers set and those will prob. be fairly close to off idle/cruise number with a slight change in the higher rpm's (relative).

From what I have seen the most impacted area from working with this is the idle part of the tune in how stable it is. I would not really focus TOO much on WOT and maybe just play with compinsating for the lifter pump up off idle.
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Nov 9, 2007
#33
  • Nov 9, 2007
  • #33
that makes sense.. the split duration and all (not too savvy on cams)..

guess you're right, man.. the main thing i wanted to take care of was the idle, and thanks to the finishing touches in help from Wes, it's pretty damned good (best it's been since i started messing w/ this stuff). i was mainly just curious about the "single # across the board" thing..

you're right--i should probably just enjoy the stability now and have some fun, finally.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

X
VE Table Not Dialed? Send Me Your Datalog.
  • X-cam34
  • Feb 8, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
2K
Digital Self-tuning Forum May 1, 2026
X-cam34
X
X
Free VE Table Corrections — Drop Your MSQ and a Datalog, I'll Do the Rest
  • X-cam34
  • Apr 12, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
2K
Digital Self-tuning Forum Aug 26, 2026
X-cam34
X
Weber Carburetor tuning help
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
244
1965 - 1973 Classic Mustangs -General/Talk- Jul 19, 2026
SchwarzStock
Forced Induction Total Timing under boost
  • Dontknowchit
  • Aug 27, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
430
Fox 5.0 Mustang Tech Aug 28, 2025
Dontknowchit
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?