First time on the track with new heads and cam

[Slow5.0]

Today I was on local track where everybody don't have traction
My previous the best time on this track without heads and cam was
2.1 60ft
14.6@92

Today first time after I installed heads and cam without tune on 93 octan and 10* timing and street weight 4015lbs and Nitto DRs tire pressure on 22psi I run
2.1 60ft
13.81@101
No traction at all, spinn tires realy bad in 1st
I think this is good improvment I cut .8 and got 9mph without tune on this track
I have videos too but I have put on server
On August 15th I going on REAL track in Thompson OH where my the best run without heads and cam was 14.1@97 with 2.0 60ft

BTW I run one moded 04 EVO 8 who run 13.98@90 and kill that mofo, I was tryin race in 20 bucks but sisi won't do that

 

[jwalker]

nice improvement!!

 

[wytstang]

Good run with no traction.

 

[mo_dingo]

BTW I run one moded 04 EVO 8 who run 13.98@90 and kill that mofo, I was tryin race in 20 bucks but sisi won't do that

Look at those sissy girls!!!!

How many runs did you get in? Your 60' didn't improve any. Did you launch at the same RPM, or did you raise/lower it?

I can't wait until you get a tune & some traction.
Scott

 

[Klunky]

22psi in those Nittos? WAY higher than I would do it for the track. Try something closer to 15psi next time. Should help that 60' time out.

 

[Slow5.0]

I try launched from 1000-3500rpms doesn't metter, its just spinn,
BTW I raced 00 GT 5 speed with s-trim ,3.73s x-pipe and chim with stock tires and beat him too
He have no traction too 2.2

I need new shocks on rear because my is shot you will see or heard on videos shakin rear end

 

[1105]

Drop the tire pressure in thoes tires down to 15psi, do a 7-8 second burnout to get them heated up good and your 60' times will get a lot better
times btw

 

[VIPERn94Five-0]

dude!....what are you doing!? is that thing still pinging!?!? your going to start blowing headgaskets like its your job if you keep driving that thing like that....

 

[Slow5.0]

Dude do you read my post about pinging, I had bad fuel, no more pinging, i'm safe right now ,don't worry
About burnout and 60ft I didn't try lowered my 60ft ,mph is what I need
BTW on this track I race in street trim 4000lb
And like I said on 15th this month I going on better track and I will see what I run over there

 

[GTJake]

Get some timing on that thing. Watch your times fall...

Jake

 

[Grn92LX]

Wow, how the hell is that car that heavy?? Bump the timing to 16-20* and like gt jake said, watch your et go down and mph go up. Why did you go with that anderson blower cam?

 

[Stump1000]

yeah get that timing up to about 17. How the hell is that car that heavy? Mine's only 3500 w/me and im fat
hehe

 

[Bad Saleen]

it is normal that i run better withtout anything only with bolt on crap ????? look in my sign my et and my mods is writed

 

[Stump1000]

Where do you run Bad Saleen?

 

[Slow5.0]

Wow, how the hell is that car that heavy?? Bump the timing to 16-20* and like gt jake said, watch your et go down and mph go up. Why did you go with that anderson blower cam?

Because I have Vert and I race in street weight with speakers in trunk and i'm 300lbs
Cam come with heads (used heads from guy on corral.net)