Flaming River Rack and Pinion Help

[Swhitney]

When I purchased my Mustang 15 years ago the previous owner had put a flaming river manual rack in. I wanted to change out the inner tie rods and notice that they do not fit (very different design). Does anyone know what style these are and where to buy? I tired contacting flaming river but they never returned my email.

Thank you,
Sean

 

[General karthief]

Call them by phone,

 

[Mustang5L5]

You need actual flaming river tie rod inners. Oem inners are female thread. I’m assuming you need male?

https://www.summitracing.com/parts/fla-fr1503-ie?seid=srese1&gclid=CjwKCAiAr6-ABhAfEiwADO4sfeK-W2MeOq1Xoq--VSBOqb7Fo1ncjUVLNevVZnF10uA5IZnNF3_U8xoCf5AQAvD_BwE

Not sure the above link is correct. Just posted as example

 

[Swhitney]

1979-93 5.0 Mustang Manual Rack & Pinion - 20:1 Standard Ratio

1979-93 5.0 Mustang Manual Rack & Pinion -20:1 Standard Ratio

www.flamingriver.com

 

[96pushrod]

https://www.summitracing.com/parts/fla-fr1508ie

 

[Swhitney]

Those are so expensive! I just ordered a brand new rack since it was 200 bucks on Amazon.