ford racing 5 lug front conversion?

[KILLER EX]

anyone use one of these conversions ? in the ford racing book the kit looks like it just comes with new rotors with 5 lugs is this right? anyone ever use it?

 

[Modular2v]

go to autozone and get rotors for a 1989 lincoln mark7....same thing

 

[KILLER EX]

thanks for the info what wheel bearings would i use? thanks!

 

[Modular2v]

you can use the same wheel bearings you have on your fox now...as long as it is a v8 car!

 

[JamesB88]

You can only run a few wheels with that. Alot of them the front center caps wont fit.

 

[cRiMiNaL]

which rims can be used? im looking into the same kit.

 

[cRiMiNaL]

torque thrust II's ?

 

[JamesB88]

I think there is a big post about what wheels will fit. I know alot of newer wheels the center caps wont fit. Bullits will fit without the center cap b/c of the dust cap. Do a search there was a big post about what wheels fit lincoln rotors.

 

[PJB]

Very few wheels will fit. Get spindles off a '94-'95 Mustang (v6 or gt or cobra) and get the calipers too (better brakes).
Then get two used driver's side axles from a '92 or older Ranger with a 7.5" rearend. They should be less than $50 each (I paid $80 for two, the cheapest price around here). Then get Ranger drums and use your stock rear brakes.

Thats the conversion Im doing. Im just waiting for the spindles and calipers I bought to get here.

Im using '03 Mustang V6 wheels.

 

[Modular2v]

i run prostars on mine ....no problems....