Ford Racing Girdle Cover - Any issues on a lowered 00 GT?

[SilverStallion]

I have 2000 GT lowered with H&R SS Springs and I would like to add the fOrd Racing Girdle cover to my rear end. Is anyone running this cover on a lowered car, and if so, are there any issues that I need to be aware of?

Thanks.
~Darren

 

[evendal]

I have a Mac girdle on my 02 with the Eibach Pro Kit. Seems to clear the sway bar ok. Only problem I had was a small leak cause I used the gasket supplied instead of silicone. She's ok now.

 

[1low03gt]

If you go with the newer style,the one with the preload bolts recessed into the cover,you will be alright.I have the older style cover,so i had to message the floor pan where the spare tire sits.(no not a hack job)This was the only mod i had to do.But like i said,with the newer style,you will be alright .

 

[SilverStallion]

Do you have a link to the new style, I am not familiar with it.

~Darren

 

[CBASS]

If you go with the newer style,the one with the preload bolts recessed into the cover,you will be alright.I have the older style cover,so i had to message the floor pan where the spare tire sits.(no not a hack job)This was the only mod i had to do.But like i said,with the newer style,you will be alright .

No problems with mine, but mine has the recessed bolts/nuts.

 

[1low03gt]

No problems with mine, but mine has the recessed bolts/nuts.

Mine is the older version with the preload bolts sticking out,plus my stang is really slammed. Had no choice,otherwise the cover would've made room on it's own.

 

[1low03gt]

Do you have a link to the new style, I am not familiar with it.

~Darren

Here is a pic of the newer style(t/a,but the same as ford racing's ).You can see the preload bolts recessed into the cover for clearance.