• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fox Ball Joints

  • Thread starter Thread starter hemi_fan
  • Start date Start date Jun 22, 2006

hemi_fan

Active Member
Apr 8, 2004
279
3
28
Ontario, Canada
Jun 22, 2006
#1
  • Jun 22, 2006
  • #1
My ball-joint just split in half yesterday, and now I am in need of replacements. I checked my Haynes manual and it says that the ball-joints are not replacable and that the entire A arm must come off and be replaced. Is this true, or can I get the ball-joints out somehow? Because I have seen individual ball-joints for sale for fox cars which makes me confused.
 
B

BLK3DGT

Member
Feb 22, 2006
47
0
6
Jun 22, 2006
#2
  • Jun 22, 2006
  • #2
Ball Joints repalced

I just pressed the lower ball joints out of my 91 Stang on both sides with no problem. NAPA sells replacement ball joints. Of course they would rather sell you the whole lower control arm!! If the arms are in good shape along with the bushings, just change the ball joints.I just replaced the steering rack, outer tie-rod ends, and lower ball joints. Car had 130,000 on original front end parts. Made a big difference in the ride. You just need to get a press to press them out and press them in. AutoZone may have one you can rent. I borrowed one from a friend and changed them right in my driveway.. Not a bad job, took about 1 hour to change the ball joints out!!

P.S YOU WILL NEED A WIDE BALL JOINT FORK ALSO, TO RELEASE THE BALL JOINT FROM THE SPINDLE. THE AUTO PARTS STORE WILL KNOW WHAT YOU'RE TALKING ABOUT
Good Luck,

BLK3dgt
 

donsbad68

Immensely Educated
Jan 4, 2003
838
0
0
Oklahoma
Jun 22, 2006
#3
  • Jun 22, 2006
  • #3
You split your ball joint? How painful was that? J/k. You can replace them. Its not hard.
 

hemi_fan

Active Member
Apr 8, 2004
279
3
28
Ontario, Canada
Jun 22, 2006
#4
  • Jun 22, 2006
  • #4
donsbad68 said:
You split your ball joint? How painful was that? J/k. You can replace them. Its not hard.
Click to expand...

lol, I got lucky... The steering started to feel really funky, and then i started to get a wierd vibration/wobble and i thought I had a flat tire. I pulled over to see if I had a flat, and did a quick visual inspection but everything looked fine. Went to pull away, and the front left tire just dropped. Luckily I was only going about 5km/h when it happened and I was already off the road... Scary though, the ball came right out of its socket... dry as bone, no grease left at all. Thanks guys, I'll be borrowing a fork and puller!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 22, 2006
#5
  • Jun 22, 2006
  • #5
hemi_fan said:
l Thanks guys, I'll be borrowing a fork and puller!
Click to expand...
Dont forget the press. It looks like a Big C-clamp with some adapters.

Make sure your control arm bosses arent out-of-round or hogged out too bad (most aftermarket BJ's are a hair larger than OEM to maintain the press fit).

If you have the cash, it's hard to go wrong with the new loaded arms from Ford. Especially if you find that you need bushings..............

Good luck.
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
Jun 22, 2006
#6
  • Jun 22, 2006
  • #6
well mine snapped last week, i bought the new A-arms from jegs with the 96-04 upgraded balljoints. these things ROCK!! corner and handling is 100x better, road feel...and for 200 to your door it was great. took me about 4 hours to replace both sides not really rushing in my garage.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Jun 23, 2006
#7
  • Jun 23, 2006
  • #7
89white50 said:
well mine snapped last week, i bought the new A-arms from jegs with the 96-04 upgraded balljoints. these things ROCK!! corner and handling is 100x better, road feel...and for 200 to your door it was great. took me about 4 hours to replace both sides not really rushing in my garage.
Click to expand...


X2 for the Ford Racing A Arms!
 
You must log in or register to reply here.

Similar threads

D
Brake & Suspension Rebuild
  • DuluthFoxbody
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
448
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 14, 2026
Rdub6
Ball Joints Question
  • 93gtmustang
  • Aug 28, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
608
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 13, 2025
AeroCoupe
P
Suspension Different height ball joints?
  • pindude80
  • Jun 10, 2024
  • Fox 5.0 Mustang Tech
Replies
15
Views
3K
Fox 5.0 Mustang Tech Jun 12, 2024
limp
T
Resolved Steering won't return to centre
  • Tom77
  • Apr 28, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 9, 2025
Tom77
T
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
900
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?