Foxbody conversion??

daviszx3 · Dec 13, 2008

a friend of mine has a 86 GT that he wants to convert the front end to the 87-93 body style and i would be helping him with this conversion, just wondering what all is needed to do this? do you have to replace just the front nose or what??
thanks in advance

riceslayer302 · Dec 13, 2008

tell him to sit in a chair next to it and look at it for awhile... if he doesnt change his mind tell him to just sell it and buy an aero nose. why waste a good 4 eye? they are rare enough as it is. theres bajillions of 87-93 cars out there.

4 eyes ftmfw

stykthyn · Dec 13, 2008

if that is what he really wants to do then he will need the front clip, body moldings, new headlight harnesses, headlights, and I am not sure if he will need a new rear bumper to match the moldings or not.

old_blue · Dec 13, 2008

I thought you could just leave the moldings and rear bumper? oh well. I agree though. Leave it a four eye. WHen I get my four eye I am just going to upgrade the powertrain to efi and maf.

riceslayer302 · Dec 13, 2008

^exactly^

i like the four eyes alot just b/c they are different. the reason i dont have one, is b/c i didnt like them when i first got into foxes. i guarantee you he'll he'd up loving them. most 4 eye guys i know wouldn't trade for anything

daviszx3 · Dec 13, 2008

ok cool thanks i will pass that on, but he is dead set on buying a 4cyl junker and converting everything over even interior so idk we will c wht happens

Beasty306GT · Dec 13, 2008

tell him to buy a 4 eye ..get an original

FrankenStang · Dec 13, 2008

Ugh. What's with all these butchering threads lately?

Beasty306GT · Dec 13, 2008

~FrankenStang~ said:
Ugh. What's with all these butchering threads lately?

There everywhere

riceslayer302 · Dec 13, 2008

screw that, i dont get why everything has to be so controlled, have a feeling this is the us government with all this thread moved thread locked bs lately.

FrankenStang · Dec 13, 2008

riceslayer302 said:
screw that, i dont get why everything has to be so controlled, have a feeling this is the us government with all this thread moved thread locked bs lately.

We don't need ten thousand conversion threads.

riceslayer302 · Dec 13, 2008

we dont need 10 thousand "cleaned and detailed my engine bay" or "check out my sick cold air intake" or "wtf is this?" threads but there are anyways? if you guys are bored go play scrabble or something lol. its an online message board not the library of congress come on. i just had this discussion with gearbanger. threads that suck will be ignored. imo they dont need to be moved or merged or closed unless they are getting really out of hand like the stupid little boys wear bowties dealthat i admit i had a big part in.... but whatever i digress...

bonestock87 · Dec 13, 2008

There everywhere

It's "they're" everywhere Mr. sunshine. And are you now Stangnet's conversion police? Those "cobra R's" came stock on your GT right?

bonestock87 · Dec 13, 2008

a friend of mine has a 86 GT that he wants to convert the front end to the 87-93 body style and i would be helping him with this conversion, just wondering what all is needed to do this? do you have to replace just the front nose or what??
thanks in advance

I actually started the "Aero nose to four-eyed" thread. Feel free to tell your friend that I'm actaully looking to do the opposite, change my 93 front end into an 85-86 GT front end. PM me if he's interested in swapping. Here's some pics of my front end, it's in great shape except for the faded paint. I can take some better ones tomorrow when it's light out.

QUICK91LX · Dec 14, 2008

Save the time and ridiculous amount of work by simply selling the 4-eye to someone who appreciates it and get an aero nose. There is no shortage of them out there. There IS, however, a shortage of decent 4-eye cars.

The swap is not as quick and easy as everyone thinks, unless you want to be a hack. Doing it right involves swapping a lot of parts besides just the nose. Otherwise you have an 86 car that got a bad nose job.

FrankenStang · Dec 14, 2008

riceslayer302 said:
we dont need 10 thousand "cleaned and detailed my engine bay" or "check out my sick cold air intake" or "wtf is this?" threads but there are anyways? if you guys are bored go play scrabble or something lol. its an online message board not the library of congress come on. i just had this discussion with gearbanger. threads that suck will be ignored. imo they dont need to be moved or merged or closed unless they are getting really out of hand like the stupid little boys wear bowties dealthat i admit i had a big part in.... but whatever i digress...

I don't think it's your place to tell the mods how to do their jobs. We answer to the Admins and Owner, not you.

These "conversion" threads usually turn into arguments. That's why they get locked/merged/deleted.

FrankenStang · Dec 14, 2008

bonestock87 said:
It's "they're" everywhere Mr. sunshine. And are you now Stangnet's conversion police? Those "cobra R's" came stock on your GT right?

I'm sorry but, wheels are easily changed. Can't compare wheels to changing the whole look of a car. Even with Cobra R rims, an '89 5.0 LX STILL looks like an '89 LX.

tiptop · Dec 14, 2008

now now, no fighting or i will close this thread, hahahaha

TC93 · Dec 14, 2008

To do the swap he will need,,,

Hood,
bumper cover with header panel,
87 -93 fenders --or---if he gets fender extensions from a 87-90 car it is a direct bolt on to the 85-86 fenders. The 91-93 fender extensions wont work because of different size fender openings..
If he does the fender extension route will atleast need the moulding that goes between the front bumper cover and the wheel well opening.
Also need plugs for the lights to splice onto the headlight harness.

As for the bumper itself I have always swapped them when doign a swap, but may 85-86 bumper might fot under the 87-93 nose....

QUICK91LX · Dec 14, 2008

Myke86GT said:
To do the swap he will need,,,

Hood,
bumper cover with header panel,
87 -93 fenders --or---if he gets fender extensions from a 87-90 car it is a direct bolt on to the 85-86 fenders. The 91-93 fender extensions wont work because of different size fender openings..
If he does the fender extension route will atleast need the moulding that goes between the front bumper cover and the wheel well opening.
Also need plugs for the lights to splice onto the headlight harness.

As for the bumper itself I have always swapped them when doign a swap, but may 85-86 bumper might fot under the 87-93 nose....

He will also need to:
-change all the rest of the moldings
-swap rear bumper cover
-change taillights
-replace the sail panels with 1/4 windows
-change drip rail moldings
-swap mirrors
-swap belt moldings
-change interior 1/4 panels to match 1/4 windows
-replace hatch area carpet to fit contours of interior 1/4 panels

That is the way you do it right. Who wants to have the newer nose when the rest of the car still has the older look? When not done complete, correct and WELL, it just looks stupid. After all that work, you STILL have the old style interior. Not to mention the fact that the ever-stregnthening value of the early fox Mustang will no longer to apply to that car. Nor will the value be as strong as an original aero nose car. Check on the price difference between an original Yenko Chevelle and a Yenko Chevelle CLONE...yeah, it's that big of a difference. Same principle applies here.

To me its not worth the time, effort or money to do all that nonsense. Just sell it and use the cash to get your hands on a decent aero nose car. It just makes more sense in more ways than one.

Foxbody conversion??

daviszx3

Member

riceslayer302

Banned

Attachments

stykthyn

I want to measure mine. It doesn't look that tall.

old_blue

riceslayer302

Banned

daviszx3

Member

Beasty306GT

Active Member

FrankenStang

Now, give me a damn CT!

Beasty306GT

Active Member

riceslayer302

Banned

FrankenStang

Now, give me a damn CT!

riceslayer302

Banned

bonestock87

bonestock87

Attachments

QUICK91LX

FrankenStang

Now, give me a damn CT!

FrankenStang

Now, give me a damn CT!

tiptop

New Member

TC93

Well-Known Member

QUICK91LX

Similar threads

Foxbody conversion??

Member

Banned

Attachments

I want to measure mine. It doesn't look that tall.

Banned

Member

Active Member

Now, give me a damn CT!

Active Member

Banned

Now, give me a damn CT!

Banned

Attachments

Now, give me a damn CT!

Now, give me a damn CT!

New Member

Well-Known Member

Similar threads

Privacy & Transparency

Privacy & Transparency