Foxbody on 20's or 18s Vote

question about the two tone.... what springs were u using and what size tires? my project is getting 18x9 and18x10:hypetcoated fr500 and is sitting on Ford racing "B " springs. i want that stance u had!

4 Year old * UPR Pro Series Drag Launch Springs
Lower Conrol arm no name i could find but i could set what ever i wanted for the rear

tires were 235 40 17 all 4


186_0748.webp


Picture011-1.webp


0201101501.webp


0201101502a.webp


DSCF7025.webp
 
I saw you couldn't decide how to swap your 4 lug tc rear end to 5 lug...

i was running into the same problem... however... it's really not hard or that expensive to go 5 lug and keep your current brake setup.

i ran 95 spindles up front...

98 axles in the rear, (94-98 mustang axles are the same length as tc axles)...
then Breeze automotive carries 93 cobra (same as TC) re-drilled for 5 lug...
Breeze Automotive Factory Five Racing

and then take the rotors to your favorite machine shop with the 5 lug axles and have them enlarge the rotor hat to slide over the larger hub of the sn95 axle... it's does not need be enlarged very much... but some..

the machinist charged me about 20 bucks to enlarge the hat... axles cost me 20 bucks, and the rotors aren't cheap but they are new...

That's how i did my swap to 5 lug.