Sold my car and no longer need this blower.... Its a Vortech V-1 S-trim, with 4500 miles on it. It comes with everything needed to mount it on 86-93 mustang plus with extra items.
Whats included with sale,
Vortech V-1 S-trim(4500 miles),
all the brackets need to mount it,( not in pictures)
I was going to use -8 braided line for oil return and have it mounted to blower, but will include the stock return line,
by pass valve,
8 inch renegade lower blower pulley,(not in pictture)
3.10 Riechard racing ultra grip blower pulley on blower,
aluminum tensioner pulley,, not the plastic one that comes with the blower from vortech,
Arp stud that mount blower to face plate, or will included ARP bolts for it,
Anderson Ford Motorsports power pipes, coated,
Crane boost retard w/ 3 bar map senor for people with HI-6 ignition box,
Mustang massair computer(A9P) with SCT programmed by JMS for 331/ blower combo with 60 ound injectors,
60 pound injectors,
Pro M 80mm mass air meter calibrated for supercharged and 60 pund injectors, have the flow sheet with it,
Brand new push loc Nylon coated fuel lines -8 feed -6 return , Russell Pro Classic,
foxbody mustang sumped tank, (not pictured)
intank pick up with -10 and -6 AN fittings, that replaces stock fuel pump assembly.
want $3000 for everything,
Anythign I have listed not pictured, will be included. I can send pictures of those items for interested buyers.
Can check it out in person, drop me an email,,
perfer to sell it person to person, so you can see what you are buying.
HPM drive shaft loop with all bolts new...
$45 shipped
More parts to come... its late..
Email or PM me for my cell number, droptop93@att.net
View attachment 221737
View attachment 221738
View attachment 221739
View attachment 221740
View attachment 221741
View attachment 221742
When it was on my 306 in car...
View attachment 221743
View attachment 221744
Whats included with sale,
Vortech V-1 S-trim(4500 miles),
all the brackets need to mount it,( not in pictures)
I was going to use -8 braided line for oil return and have it mounted to blower, but will include the stock return line,
by pass valve,
8 inch renegade lower blower pulley,(not in pictture)
3.10 Riechard racing ultra grip blower pulley on blower,
aluminum tensioner pulley,, not the plastic one that comes with the blower from vortech,
Arp stud that mount blower to face plate, or will included ARP bolts for it,
Anderson Ford Motorsports power pipes, coated,
Crane boost retard w/ 3 bar map senor for people with HI-6 ignition box,
Mustang massair computer(A9P) with SCT programmed by JMS for 331/ blower combo with 60 ound injectors,
60 pound injectors,
Pro M 80mm mass air meter calibrated for supercharged and 60 pund injectors, have the flow sheet with it,
Brand new push loc Nylon coated fuel lines -8 feed -6 return , Russell Pro Classic,
foxbody mustang sumped tank, (not pictured)
intank pick up with -10 and -6 AN fittings, that replaces stock fuel pump assembly.
want $3000 for everything,
Anythign I have listed not pictured, will be included. I can send pictures of those items for interested buyers.
Can check it out in person, drop me an email,,
perfer to sell it person to person, so you can see what you are buying.
HPM drive shaft loop with all bolts new...
$45 shipped
More parts to come... its late..
Email or PM me for my cell number, droptop93@att.net
View attachment 221737
View attachment 221738
View attachment 221739
View attachment 221740
View attachment 221741
View attachment 221742
When it was on my 306 in car...
View attachment 221743
View attachment 221744