Okay, so here is my set up
351w, scat crank, h beam rods, srp pistons, hyd roller blower cam (custom grind), afr 205's, edlebrook upper and lower, 7-10 psi from sn2000 paxton blower. Altogether makes 8.9:1 compression, most likely 75mm tb. I need help choosing injector size, mass air size and fuel supply. I am talking with someone right now about buying his aeromotive set up p/n 17105 which is good for 400-700 s/c or nitrous applications. If someone can help with what I need to feed this engine please, I need help. If any questions post or aim me v8pony707
Thanks
351w, scat crank, h beam rods, srp pistons, hyd roller blower cam (custom grind), afr 205's, edlebrook upper and lower, 7-10 psi from sn2000 paxton blower. Altogether makes 8.9:1 compression, most likely 75mm tb. I need help choosing injector size, mass air size and fuel supply. I am talking with someone right now about buying his aeromotive set up p/n 17105 which is good for 400-700 s/c or nitrous applications. If someone can help with what I need to feed this engine please, I need help. If any questions post or aim me v8pony707
Thanks