Fuel injector question

for 300 flywheel hp and below stick with 19 pounders. want improved flow design cheap? use explorer 19 pound injectors.

it really depends on how far you're planning to go...if you plan to exceed about 300 flywheel hp, then you should probably upgrade to 24lb or you could start taxing the 19lbers. I'm still running the old style 19lbers, and they work fine though. with the mods that are in my sig.

as far as the diff between the old vs the new, I believe the primary difference has to do with spray pattern/atomization and current consumption...in short-more efficient. However, I can't really confirm that. Just keep in mind that if you do choose to change injector sizes, that you will either need to get a MAF "calibrated" for them, or have a tune done.

Of course, tuning would be the best way to go, but if you're still running the stock MAF, then a new bigger MAF would be an improvement

cool daddio-let us know how it goes...