Gauge Location Idea

94_Teal_GT

Founding Member

Aug 14, 2002

405

0

0

Palm Bay, FL

May 2, 2004

#1

• May 2, 2004

• #1

I'm going to get some gauges for my 94 soon, but I don't want them mounted on the A-pillar or in place of the clock. What I'm wondering is, has anyone installed their gauges in the 'storage' tray under the stereo? I asked for the length and width of the Autometer Gauge Cage for the fox in 5.0 Tech but got no replies. I could make a panel to put in place of the tray and install the gauges in it, anyone done this? If so, a picture would be great. OR, can the cassette deck be moved down to the package tray w/o massive rewiring of the stereo?

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

May 2, 2004

#2

• May 2, 2004

• #2

yes

 

Attachments

• h2oprsrgge.webp

  60.7 KB · Views: 148

jmuva44

Founding Member

Nov 25, 2000

1,338

0

36

Richmond, VA

May 2, 2004

#3

• May 2, 2004

• #3

I made one of them too but didnt use thick enough acrylic and it cracked. Needless to say its duct taped together as a temporary fix till I get my clock pod.

I stole the idea from 95snoozer....

 

94_Teal_GT

Founding Member

Aug 14, 2002

405

0

0

Palm Bay, FL

May 2, 2004

#4

• May 2, 2004

• #4

95snoozer said:

yes

Click to expand...

Thanks! that's exactly what I was looking for. Looks sharp too! Is that a piece of lexan/acrylic? I was thinking of using aluminum, but lexan would be alot easier to work with, plus I could cover it with whatever I wanted, I suppose.

Edit: I was studying the picture and was wondering, are the gauges recessed into the panel?

 

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

May 2, 2004

#5

• May 2, 2004

• #5

snoozer are you using the water injection kit on your car, if so i would like to hear about it

jason

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

May 2, 2004

#6

• May 2, 2004

• #6

taht is not my car

you need to use acrylic to make the piece though. the guages are recessed yes.

get a compas and a dremel, or you can find some shop with a 2 inch bit for a drill press to cut the hioles out.


I am N/A

 

jmuva44

Founding Member

Nov 25, 2000

1,338

0

36

Richmond, VA

May 2, 2004

#7

• May 2, 2004

• #7

If money isnt an issue, you can buy these prefabbed on Ebay for about $40. They are made out of aluminum.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2473986521&category=33675