• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2010 - 2014 Specific Tech

Gears For Automatic

  • Thread starter Thread starter gtrosema
  • Start date Start date Aug 20, 2014
G

gtrosema

New Member
May 4, 2009
8
0
1
Aug 20, 2014
#1
  • Aug 20, 2014
  • #1
Just bought a 2014 GT convertible. And am not familiar with the 6 spd automatic. I had a 04 Mach 1 and loved the 4.10 I put in it. Am debating on 3.55 or 3.73, Wife thinks it is fast enough already with 3.15 ...well you know.lol Anyone with either give me your thoughts,
Thanks
 
M

mrt806

Member
Aug 10, 2014
15
2
13
Aug 20, 2014
#2
  • Aug 20, 2014
  • #2
I am having the same delima I would like to know rpm at 75 mph 355 & 373
 
G

gtrosema

New Member
May 4, 2009
8
0
1
Aug 20, 2014
#3
  • Aug 20, 2014
  • #3
Just do the math.
 
M

mrt806

Member
Aug 10, 2014
15
2
13
Aug 20, 2014
#4
  • Aug 20, 2014
  • #4
Whats the formula
 
G

gtrosema

New Member
May 4, 2009
8
0
1
Aug 20, 2014
#5
  • Aug 20, 2014
  • #5
Take yourr current gear ratio and subtract the difference between the two. 3.73 - 3.15 .58 so around 580 rpms. Roughly
 

Mustang Bob

New Member
Feb 13, 2014
11
1
2
Aug 22, 2014
#6
  • Aug 22, 2014
  • #6
I have spoken with speed shop I am dealing with ( Maximum Velocity) and Tracy said that the 3.15 rear gears and the gears in the tranny are a perfect setup. She said that if you go with a shorter rear, hookup will suffer. Will develop too much wheel spin.
 

nyuk98gt

15 Year Member
Oct 10, 2000
1,427
6
79
Chesterfield, MO
Aug 25, 2014
#7
  • Aug 25, 2014
  • #7
Mustang Bob:

I just read another 'gears for auto' thread on another board and the fellow installed 3.73's and found 1st gear useless and traction was tricky. A reply to the OP's question was 3.15's (or 3.31's, max). I don't know anything about the new A6 but the usual gear swap has to be much more carefully considered. That's all I can offer, lol, but it sounds like your speed shop gave you some excellent advice. A tune is highly recommended (gets rid of throttle lag, quickens shifts, improves shift points, etc., etc.,) but you have to be cautious or your warranty will be voided. If Ford offers a ProCal tune for autos then that is a good bet (I have the M6 ProCal tune on my '12 and it is mighty fine, imho).

HTH,

Chris
 

nyuk98gt

15 Year Member
Oct 10, 2000
1,427
6
79
Chesterfield, MO
Aug 25, 2014
#8
  • Aug 25, 2014
  • #8
gtrosema said:
Take yourr current gear ratio and subtract the difference between the two. 3.73 - 3.15 .58 so around 580 rpms. Roughly
Click to expand...

gtrosema,

I think you mean take the ratio of the new gear to the old gear and apply the factor to the old RPM to get the new RPM:

Say, 3.15 gears at 2500 RPM is the basis. What will the RPM be if 3.73 gears are installed?

Calculation:

New RPM = 3.73 / 3.15 * 2500 = 1.1841 * 2500 = 2960 RPM

Or, we can say that the new RPM is 18% higher than the old RPM:
1000 ---> 1841 RPM
3000 ---> 3552 RPM
6000 ---> 7105 RPM

HTH,

Chris
 
You must log in or register to reply here.

Similar threads

S
Engine 2003 Mach 1 Automatic Upgrades assistance
  • SJK1417M1AT
  • Sep 25, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
295
SN95 4.6L Mustang Tech Dec 21, 2025
01SVTvertt
0
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
700
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
567
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
C
Suggestions for rear diff gears - 1969 Mach 351W 4v
  • cfauvel
  • Apr 8, 2024
  • Classic Mustang Specific Tech
Replies
10
Views
2K
Classic Mustang Specific Tech Jun 27, 2024
cfauvel
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2010 - 2014 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?