Good Cam For My 331

[KDK1988GT]

I was looking over cams and I'm not sure witch one would be the best for me in my 331... I don't want anything really extreme. Want to idel at the lights Thanks

 

[TIMMY2734]

what all does your 331 consist of?

 

[KDK1988GT]

well thinking of going with at set of the new edelbrock alum heads and a stroker kit from DSS base pro lite stroker kit... forged I beam rods, pro lite forged pistons, and a race prepped stock crank. might go with 1.7 rockers. Crobra Upper lower.. and a Zex nitrous kit, 125 dry shot..

 

[hoss331stang]

Comp Cams XE274..nice cam for a 331.....i have it....it made 450 hp on my exact combo in MM&FF

 

[89tang]

Ed Curtis can hook you up with a custom cam.

 

[KDK1988GT]

Comp Cams XE274..nice cam for a 331.....i have it....it made 450 hp on my exact combo in MM&FF

Looks like your motor made some good power

 

[KDK1988GT]

Ed Curtis can hook you up with a custom cam.

If i was in the US i might get one made but I'm up here in Canada, what kind off cash I'm I looking at?

 

[89tang]

http://www.flowtechinduction.com/

Send him an email, his cams are 325 us dollars. He's delt with canadians before i think, give him a call or email i wouldn't see why he wouldn't deal with ya cause you in canada

 

[KDK1988GT]

http://www.flowtechinduction.com/

Send him an email, his cams are 325 us dollars. He's delt with canadians before i think, give him a call or email i wouldn't see why he wouldn't deal with ya cause you in canada

Thanks man

 

[Michael Yount]

KDK - Go here if you'd like to educate yourself about camshafts. http://www.wighat.com/fcr3/

89tang - the Canadian issue often has more to do with the exchange rate which makes some of our stuff prohibitively high priced.

 

[houstonstangguy]

i am using a tfs stage 3 cam with my chp 331 and its pretty nice but i am going to do an ed curtis cam in the future. its only making 400hp right now, but the cobra intake, 65mm throttle body and probably the 75mm mass air meter is robbing some power. i think ed recommends an 80mm m.a.f

good luck with the 331 its definitely fun.

joe