• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

good first mods

  • Thread starter Thread starter mustangluvr8993
  • Start date Start date Dec 30, 2005
Prev
  • 1
  • 2
First Prev 2 of 2

Curse

Member
Apr 8, 2004
791
2
16
El Paso, TX
Jan 1, 2006
#21
  • Jan 1, 2006
  • #21
88Stangboy said:
I would stay away from nitrous, it shortens engine life, it's good for the track to improve e.t's but it definatly shortens engine life.
Click to expand...

Nitrous will only shorten your engine life if you do not know how to use it. Same with any other power adder.

Once you start making all the power you want, don't forget a good set of sticky tires. All the power in the world means nothing if you can't put it to the ground.
 
D

Deleted member 87397

Jan 1, 2006
#22
  • Jan 1, 2006
  • #22
350 hp and above on NA engine is not going to happen with simple cheap mods so if you want it, eventually you're going to have to pay for it.

Mods that improve perfomance but not hp are:

-Any kind of weight reduction (fiberglass hood, trunk, spare tire, jack etc.)
-Rearend Gears (3.55 or 3.73)
-Short shifter on a manual trans. or valve body upgrade on auto
-Adjust TPS voltage as close to .98 as possible (do a search for instructions)

Simple cheap first mods that will boost hp a little bit are:

-A good tune up using quality parts, FRPP, MSD, Accel (plugs, wires, cap, rotor, fuel filter)
-Remove air intake silencer (free)
-Put a K&N filter in the stock air box (25-30 bucks)
-Advance your timing to 12 or 14 deg. (free) (run premium gas if you go above 12)
-If you advance timing, up your fuel pressure a bit w/ an adj. FPR (60 bucks) and you'll get the same benefit as a chip for a lot cheaper.
-U/D pullies and electric fan if your alt. can handle it.
-A larger Throttle body, 65mm is all you'd need, but port the intake opening to match or it's basically worthless.
-70 or 76mm MAF depending on what your future modification plans are
-Shorty Headers and an H-Pipe. I'd use an aftermarket H with high flow cats since your mods up to this point don't require the elimination a ton of backpressure like an off road H would give.

At this point you're pretty much done with all the mildly inexpensive mods. The big stuff like H/C/I, nitrous, or poweradders usually comes next.
 

aleborjas

New Member
Sep 11, 2005
610
0
0
Jan 1, 2006
#23
  • Jan 1, 2006
  • #23
304billet said:
The only way to achieve 350fwhp NA is to swap out the heads, cam and intake. AFR165, TFS TW heads, RPM ll intake port matched, Comp Cam XE274HR, Accufab 65mm TB, PMAS 70mm, MAF, LT headers. Costs about $4K w/ labor.

u could also just thow a S-trim blower on it 10-12lbs of boost and hit 350rwhp. $4K.

If I had this choice I would do the blower.
Click to expand...
RPM II is too big for a stock short block may be the RPM or Track heat
 

fiveohwblow

Official Member
15 Year Member
Jul 21, 2005
2,169
145
155
Jan 1, 2006
#24
  • Jan 1, 2006
  • #24
fastfox86 said:
350 hp and above on NA engine is not going to happen with simple cheap mods so if you want it, eventually you're going to have to pay for it.

Mods that improve perfomance but not hp are:

-Any kind of weight reduction (fiberglass hood, trunk, spare tire, jack etc.)
-Rearend Gears (3.55 or 3.73)
-Short shifter on a manual trans. or valve body upgrade on auto
-Adjust TPS voltage as close to .98 as possible (do a search for instructions)

Simple cheap first mods that will boost hp a little bit are:

-A good tune up using quality parts, FRPP, MSD, Accel (plugs, wires, cap, rotor, fuel filter)
-Remove air intake silencer (free)
-Put a K&N filter in the stock air box (25-30 bucks)
-Advance your timing to 12 or 14 deg. (free) (run premium gas if you go above 12)
-If you advance timing, up your fuel pressure a bit w/ an adj. FPR (60 bucks) and you'll get the same benefit as a chip for a lot cheaper.
-U/D pullies and electric fan if your alt. can handle it.
-A larger Throttle body, 65mm is all you'd need, but port the intake opening to match or it's basically worthless.
-70 or 76mm MAF depending on what your future modification plans are
-Shorty Headers and an H-Pipe. I'd use an aftermarket H with high flow cats since your mods up to this point don't require the elimination a ton of backpressure like an off road H would give.

At this point you're pretty much done with all the mildly inexpensive mods. The big stuff like H/C/I, nitrous, or poweradders usually comes next.
Click to expand...
What he said, EXACTLY
 
M

mustangluvr8993

New Member
Jul 2, 2005
9
0
0
Jan 1, 2006
#25
  • Jan 1, 2006
  • #25
ok heres what i wanna get and i wanna do it all at once. but i might hold off until i can get everything i want instead of doing some here some there. so i might have to get some more more money. i want the supercharger, gt40x turbo swirl heads, ford motor sports f303 cam, trick flow track heat intake, granitelli mass air and match the injectors, i shouldnt need a cold air intake because of the supercharger, 3.55 gears, short throw shifter, headers, off road x or h pipe, cat back exhaust and oher little odds and ends. ok so ill know what mass air to use, what size injectors should i use? would you use 30 lb's? should i re program the computer with the diablo motorsports tuner? i only want to run 6 lb's of boost at first.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Jan 1, 2006
#26
  • Jan 1, 2006
  • #26
It'll need to a be a blow-through design maf meter. Whoever brought out ProM makes them in 80mm size. You'll probably need 36lbs. injectors. Diablo doesn't do chips for 5.0s that I know of. You won't need a CAI, but Anderson Ford Motorsports makes them for superchargers and they usually add 20hp or so. You'll need to get a custom chip burned from a local tuner or buy a Tweecer, Anderson Ford Motorsport PMS, or go standalone such as a FAST system.
 
D

Deleted member 87397

Jan 1, 2006
#27
  • Jan 1, 2006
  • #27
You'll definitely need more more money. 30 pounders should work for 6 psi. I'd go with a Pro-M MAF and spring for some better heads if you are already doing that much work and investing that much money all at once. You'll love it when you're done though.

OH, and thanks for the props fiveohblow.
 
M

mustangluvr8993

New Member
Jul 2, 2005
9
0
0
Jan 2, 2006
#28
  • Jan 2, 2006
  • #28
ok and then what size throttle body should i use? 70 or 75mm?
 

88Stangboy

Banned
Dec 12, 2005
342
0
0
Greenville, SC
Jan 2, 2006
#29
  • Jan 2, 2006
  • #29
no matter how much nitrous you use, its going to shorten your engine life somewhat. Ask any professional engine builder and you will hear the same. It may be 5,000miles or 50,000 miles depending on how much you use, it puts tremendous stress on your rod and main bearings. Of course if you build an engine to handle nitrous it will hold up much, much better. And don't forget about your clutch and drivline also, a stock T-5 is going to need a second look if you are planning on running 350hp.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jan 2, 2006
#30
  • Jan 2, 2006
  • #30
mustangluvr8993 said:
ok and then what size throttle body should i use? 70 or 75mm?
Click to expand...


Most (not all) naturally aspirated and small super charger setups will be fine with a 65mm / 70mm throttle body. I'd stay with the smaller of those two, but that is just me.
 

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
Jan 2, 2006
#31
  • Jan 2, 2006
  • #31
Nitrous makes horsepower....anything that adds horsepower will "shorten" the life of your engine. Run properly, nitrous is no more detrimental than boost.
 

88Stangboy

Banned
Dec 12, 2005
342
0
0
Greenville, SC
Jan 2, 2006
#32
  • Jan 2, 2006
  • #32
Yes thats true also, but not nearly as quickly as nitrous does. Ask anyone who knows about it, nitrous is hell on a stock engine, it just shortens engine life quicker than just about anything. Boost does to, but boost is not as nearly as violent as nitrous. Its just like when someone is walking on your back, its nice and easy, but have them jump up and down on you...see what im saying. I've pulled apart two engines that had nitrous ran through them, the bearings in both engines both looked like they had 200,000 miles on them, the engines had about 90,000 miles each, the wear shows....each engine had a 100hp shot on them. IMO i just don't prefer nitrous...its kinda cheater hp anyways...just my opinion though.
 
M

mustangluvr8993

New Member
Jul 2, 2005
9
0
0
Jan 2, 2006
#33
  • Jan 2, 2006
  • #33
i dont plan on using nitrous anyway
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
518
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Suspension Is somethig Wrong Here?
  • Icemanxxxv
  • Jul 11, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
229
Fox 5.0 Mustang Tech Jul 11, 2026
AeroCoupe
H
New here and thanks
  • HoosierD420
  • Aug 30, 2026
  • The Welcome Wagon
Replies
0
Views
145
The Welcome Wagon Aug 30, 2026
HoosierD420
H
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?