got me some headers

ryan218 · Dec 31, 2007

picked up some headers for cheap today ill put em in tuesday, ill get a vid up.

a little rusty because they have been sitting around in his garage since 2000

the guy i bought them from had a kenny bell 04 cobra, 06 gto and a 87 GT mild H/C/I...

cool guy none the less, says he has some other performance parts laying around that he can sell me for dirt cheap as he is moving sometime soon.

JGT · Dec 31, 2007

Those studs look like fun.

ryan218 · Dec 31, 2007

JGT said:
Those studs look like fun.

cleaned up fine with the wire wheel

JGT · Dec 31, 2007

LiquidGT · Dec 31, 2007

Those look like mac's, I have those. If you want to, spray them with some high temp header paint from the Zone it actually works. I hope you have the bolts because the stock ones are too big, you can get some from the Zone too, unfortunatally its a chevy 12 pack fords need 16 so you have to get 2.

ryan218 · Dec 31, 2007

LiquidGT said:
Those look like mac's, I have those. If you want to, spray them with some high temp header paint from the Zone it actually works. I hope you have the bolts because the stock ones are too big, you can get some from the Zone too, unfortunatally its a chevy 12 pack fords need 16 so you have to get 2.

high temp paint, ya thought of it but its 30* and it wont stick for crap.

yeah there MAC got em for 50 bucks.

really? stock header bolts are to big? thats ****ty...thanks for the fyi i would of got them off and been like wtf.

so you say i need to get different header bolts? happen to have a part number.

LiquidGT · Dec 31, 2007

ryan218 said:
high temp paint, ya thought of it but its 30* and it wont stick for crap.

yeah there MAC got em for 50 bucks.

really? stock header bolts are to big? thats ****ty...thanks for the fyi i would of got them off and been like wtf.

so you say i need to get different header bolts? happen to have a part number.

I dont remember the part # but its the spectre brand that you should find in the performance isle on the floor, they're gold colored bolts with a little socket hex wrench and are the only ones they sell.

Roland69 · Dec 31, 2007

just ask around some shops may stock them. they are 3/8 X 16 thread...I would go with some that are 1 inch long the ones that came with my BBK were 3/4 of an inch and they are a little short but they still work fine. Just make sure you check them after the first few heat and cool cycles and maby every few days after that for a few times then they should be good. I keep a 3/8 wrench in my car lol.

91 HATCH · Dec 31, 2007

I would buy all the parts he has if i was you

ryan218 · Dec 31, 2007

91 HATCH said:
I would buy all the parts he has if i was you

wish i could, all the parts to the cobra he is keeping...:sad:

he has a few sets of wheels the fox a few intakes, ect...

ryan218 · Dec 31, 2007

LiquidGT said:
I dont remember the part # but its the spectre brand that you should find in the performance isle on the floor, they're gold colored bolts with a little socket hex wrench and are the only ones they sell.

ok ill do that thanks, happen to remember how much they were?

carbed87 · Dec 31, 2007

not to thread jack, but what would you guys think a set of equals in a little better condition would go for...like 75 or so. nice job on the score too ryan

ryan218 · Dec 31, 2007

carbed87 said:
not to thread jack, but what would you guys think a set of equals in a little better condition would go for...like 75 or so. nice job on the score too ryan

id say 75 at the most!

RS200 · Dec 31, 2007

ryan218 said:
high temp paint, ya thought of it but its 30* and it wont stick for crap.

yeah there MAC got em for 50 bucks.

really? stock header bolts are to big? thats ****ty...thanks for the fyi i would of got them off and been like wtf.

so you say i need to get different header bolts? happen to have a part number.

Heat them with a torch, then spray.

5.0Droptop · Dec 31, 2007

I took a set like that to work and glassbead blasted them, after blasting they looked new.

ryan218 · Dec 31, 2007

RS200 said:
Heat them with a torch, then spray.

i have no torches laying around...nor do i feel like buying one

headers can look like hell for all i care, this is my daliy driver so its not perfect. if it was perfect id never drive it...whats the fun in that?

thats not a bad idea though.

cervinistang · Jan 1, 2008

spray em inside? basement? wait till spring?

LiquidGT · Jan 1, 2008

ryan218 said:
ok ill do that thanks, happen to remember how much they were?

They were only $6 or 7 bucks a pack, you'll have a couple of spare ones left.

ryan218 · Jan 1, 2008

cervinistang said:
spray em inside? basement? wait till spring?

no basement, ranch style house here..nah dont feel like waiting that long,

wanna know the best thing about these headers? its that there ment for the gt40p heads, so when i go to put the gt40p heads on i wont have to worry about headers, im shooting for a 270 rwhp combo by the end of 2008 without touching the cam, or injectors...

i gotz a new list made up tonight!

RS200 · Jan 1, 2008

ryan218 said:
no basement, ranch style house here..nah dont feel like waiting that long,

wanna know the best thing about these headers? its that there ment for the gt40p heads, so when i go to put the gt40p heads on i wont have to worry about headers, im shooting for a 270 rwhp combo by the end of 2008 without touching the cam, or injectors...

i gotz a new list made up tonight!

got me some headers

In just 10 years, I'll be old enough to drive!!!!

Attachments

Member

In just 10 years, I'll be old enough to drive!!!!

Member

Member

In just 10 years, I'll be old enough to drive!!!!

Member

Sergeant Tangnet

Banned

In just 10 years, I'll be old enough to drive!!!!

In just 10 years, I'll be old enough to drive!!!!

Member

In just 10 years, I'll be old enough to drive!!!!

Member

...all those nights we shared, and you're a dude??

In just 10 years, I'll be old enough to drive!!!!

New Member

Member

In just 10 years, I'll be old enough to drive!!!!

Member

Similar threads

Privacy & Transparency

Privacy & Transparency