got me some headers

[ryan218]

picked up some headers for cheap today ill put em in tuesday, ill get a vid up.

a little rusty because they have been sitting around in his garage since 2000

the guy i bought them from had a kenny bell 04 cobra, 06 gto and a 87 GT mild H/C/I...

cool guy none the less, says he has some other performance parts laying around that he can sell me for dirt cheap as he is moving sometime soon.

 

[JGT]

Those studs look like fun.

 

[ryan218]

Those studs look like fun.

cleaned up fine with the wire wheel

 

[JGT]

 

[LiquidGT]

Those look like mac's, I have those. If you want to, spray them with some high temp header paint from the Zone it actually works. I hope you have the bolts because the stock ones are too big, you can get some from the Zone too, unfortunatally its a chevy 12 pack fords need 16 so you have to get 2.

 

[ryan218]

Those look like mac's, I have those. If you want to, spray them with some high temp header paint from the Zone it actually works. I hope you have the bolts because the stock ones are too big, you can get some from the Zone too, unfortunatally its a chevy 12 pack fords need 16 so you have to get 2.

high temp paint, ya thought of it but its 30* and it wont stick for crap.

yeah there MAC got em for 50 bucks.

really? stock header bolts are to big? thats ****ty...thanks for the fyi i would of got them off and been like wtf.

so you say i need to get different header bolts? happen to have a part number.

 

[LiquidGT]

high temp paint, ya thought of it but its 30* and it wont stick for crap.

yeah there MAC got em for 50 bucks.

really? stock header bolts are to big? thats ****ty...thanks for the fyi i would of got them off and been like wtf.

so you say i need to get different header bolts? happen to have a part number.

I dont remember the part # but its the spectre brand that you should find in the performance isle on the floor, they're gold colored bolts with a little socket hex wrench and are the only ones they sell.

 

[Roland69]

just ask around some shops may stock them. they are 3/8 X 16 thread...I would go with some that are 1 inch long the ones that came with my BBK were 3/4 of an inch and they are a little short but they still work fine. Just make sure you check them after the first few heat and cool cycles and maby every few days after that for a few times then they should be good. I keep a 3/8 wrench in my car lol.

 

[91 HATCH]

I would buy all the parts he has if i was you

 

[ryan218]

I would buy all the parts he has if i was you

wish i could, all the parts to the cobra he is keeping...:sad:


he has a few sets of wheels the fox a few intakes, ect...

 

[ryan218]

I dont remember the part # but its the spectre brand that you should find in the performance isle on the floor, they're gold colored bolts with a little socket hex wrench and are the only ones they sell.

ok ill do that thanks, happen to remember how much they were?

 

[carbed87]

not to thread jack, but what would you guys think a set of equals in a little better condition would go for...like 75 or so. nice job on the score too ryan

 

[ryan218]

not to thread jack, but what would you guys think a set of equals in a little better condition would go for...like 75 or so. nice job on the score too ryan

id say 75 at the most!

 

[RS200]

high temp paint, ya thought of it but its 30* and it wont stick for crap.

yeah there MAC got em for 50 bucks.

really? stock header bolts are to big? thats ****ty...thanks for the fyi i would of got them off and been like wtf.

so you say i need to get different header bolts? happen to have a part number.

Heat them with a torch, then spray.

 

[5.0Droptop]

I took a set like that to work and glassbead blasted them, after blasting they looked new.

 

[ryan218]

Heat them with a torch, then spray.

i have no torches laying around...nor do i feel like buying one

headers can look like hell for all i care, this is my daliy driver so its not perfect. if it was perfect id never drive it...whats the fun in that?

thats not a bad idea though.

 

[cervinistang]

spray em inside? basement? wait till spring?

 

[LiquidGT]

ok ill do that thanks, happen to remember how much they were?

They were only $6 or 7 bucks a pack, you'll have a couple of spare ones left.

 

[ryan218]

spray em inside? basement? wait till spring?

no basement, ranch style house here..nah dont feel like waiting that long,

wanna know the best thing about these headers? its that there ment for the gt40p heads, so when i go to put the gt40p heads on i wont have to worry about headers, im shooting for a 270 rwhp combo by the end of 2008 without touching the cam, or injectors...


i gotz a new list made up tonight!

 

[RS200]

no basement, ranch style house here..nah dont feel like waiting that long,

wanna know the best thing about these headers? its that there ment for the gt40p heads, so when i go to put the gt40p heads on i wont have to worry about headers, im shooting for a 270 rwhp combo by the end of 2008 without touching the cam, or injectors...


i gotz a new list made up tonight!