• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Gt40 Heads From The Yard!

  • Thread starter Thread starter Reddevil91
  • Start date Start date Aug 8, 2017

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Aug 8, 2017
#1
  • Aug 8, 2017
  • #1
So I'm thinking about grabbing some GT40 heads from a pick and pull yard hopefully, possibly gt40p but I'd rather stay non P. What should I stay away from in regards to wear and tear, or look for to say this is a good grab? Any info helps before I go for it thanks.
 

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Aug 9, 2017
#2
  • Aug 9, 2017
  • #2
The issue with GT40s from a junk yard is that the newest ones would be around 20 years old. So unless your willing to do the work to install them on your car and just hope they are OK it's hard to save money going that route. They really need to go to a machine shop be checked out, cleaned up, have the valves serviced (seals, seats, guides) and have the valves springs replaced. This can cost $400-500 plus parts. So basically you could end up with $600-700 in them easy. LMR sells their knock off SVE aluminum heads for sub $800.
 
Reactions: General karthief

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Aug 10, 2017
#3
  • Aug 10, 2017
  • #3
Dan02gt said:
This can cost $400-500 plus parts. So basically you could end up with $600-700 in them easy. LMR sells their knock off SVE aluminum heads for sub $800.
Click to expand...

I agree. By the time you go through the heads and change out the springs and perform some machine work, you would be better off investing in a set of AL heads.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Aug 10, 2017
#4
  • Aug 10, 2017
  • #4
I'd look on CL or Ebay or Corral. There are guys selling GT40 heads that already have upgraded springs, and and already machined and cleaned up sometimes for $300 to $400. Again, you have to watch what you are buying, I wouldn;t spend a penny more on them as you can get a good set of new alum heads for $1000 to $1200.

I normally do not recommend buying used heads as 99% of the time you will need to pay to have them checked out, milled, and maybe a new guides, seals or valves. Expect to spend at least $150 to $200 minumum to the machine shop so factor that into the price.
 
Reactions: Reddevil91

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Aug 11, 2017
#5
  • Aug 11, 2017
  • #5
mikestang63 said:
I'd look on CL or Ebay or Corral. There are guys selling GT40 heads that already have upgraded springs, and and already machined and cleaned up sometimes for $300 to $400. Again, you have to watch what you are buying, I wouldn;t spend a penny more on them as you can get a good set of new alum heads for $1000 to $1200.

I normally do not recommend buying used heads as 99% of the time you will need to pay to have them checked out, milled, and maybe a new guides, seals or valves. Expect to spend at least $150 to $200 minumum to the machine shop so factor that into the price.
Click to expand...
So I've been searching d/t going out and searching and realizing 1. They were gt40p and 2. In real bad shape so I passed on the yard. Found these on eBay reg. CI GT40s cleaned and re manufactured asking 325. Also found another set which I'll post. Let me know if you've heard of these and if they are proper, says they are from summit.
 

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Aug 11, 2017
#6
  • Aug 11, 2017
  • #6
mikestang63 said:
I'd look on CL or Ebay or Corral. There are guys selling GT40 heads that already have upgraded springs, and and already machined and cleaned up sometimes for $300 to $400. Again, you have to watch what you are buying, I wouldn;t spend a penny more on them as you can get a good set of new alum heads for $1000 to $1200.

I normally do not recommend buying used heads as 99% of the time you will need to pay to have them checked out, milled, and maybe a new guides, seals or valves. Expect to spend at least $150 to $200 minumum to the machine shop so factor that into the price.
Click to expand...
These were the aluminum ones o saw on eBay from summit for 599.
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Aug 11, 2017
#7
  • Aug 11, 2017
  • #7
No to eBay heads or SVE aluminum heads. I think $600 is the max I would spend on iron GT40s. If you pair that with a custom cam you could realistically be just under $1000. It would be hard to get a good set of aluminum heads for a grand. Plus the right custom cam with iron heads could even out perform an out the box aluminum head and OTS cam combo. Look at your whole combo and make sure it works together before spending money in one place.
 

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Aug 11, 2017
#8
  • Aug 11, 2017
  • #8
deathb4dismount said:
No to eBay heads or SVE aluminum heads. I think $600 is the max I would spend on iron GT40s. If you pair that with a custom cam you could realistically be just under $1000. It would be hard to get a good set of aluminum heads for a grand. Plus the right custom cam with iron heads could even out perform an out the box aluminum head and OTS cam combo. Look at your whole combo and make sure it works together before spending money in one place.
Click to expand...
So my current set up which was before I garaged the car 12 years ago is, all the basic exhaust,gears, pulleys blah blah, I have an f-303, with 1.7 rr's, bbk 65mm Tb with spacer and I'm about to add a GT40 intake tomorrow which I'll be picking up for a good deal. So I figured once I rip that stock intake off I'd like to go ahead and replace the heads. So trying to find a good deal but not drop an arm and a leg, while I'm in the air between turbo vs blower, or just going full swap to a coyote
 

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Aug 11, 2017
#9
  • Aug 11, 2017
  • #9
deathb4dismount said:
No to eBay heads or SVE aluminum heads. I think $600 is the max I would spend on iron GT40s. If you pair that with a custom cam you could realistically be just under $1000. It would be hard to get a good set of aluminum heads for a grand. Plus the right custom cam with iron heads could even out perform an out the box aluminum head and OTS cam combo. Look at your whole combo and make sure it works together before spending money in one place.
Click to expand...
But just to pick your brain why no on the iron GT40s from eBay that have been redone or the SVEs?
 

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Aug 12, 2017
#10
  • Aug 12, 2017
  • #10
SVEs are Chinese knock offs of Pro Comp heads. So there is a quality concern there. However, a friend of mine installed them in his '94 GT and has been really happy with them. He spent a good about of time on the phone with LMR talking about them. LMR stands behind them 100% and several of their employees run them on their personal cars. Only time will tell how the valve train holds up.
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Aug 12, 2017
#11
  • Aug 12, 2017
  • #11
Dan02gt said:
SVEs are Chinese knock offs of Pro Comp heads. So there is a quality concern there. However, a friend of mine installed them in his '94 GT and has been really happy with them. He spent a good about of time on the phone with LMR talking about them. LMR stands behind them 100% and several of their employees run them on their personal cars. Only time will tell how the valve train holds up.
Click to expand...

Aren't pro comps chinee knock offs of performer heads? That's the reason I would not run them.
 
Reactions: Noobz347

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,563
21,730
234
Box behind Walmart
Aug 12, 2017
#12
  • Aug 12, 2017
  • #12
deathb4dismount said:
Aren't pro comps chinee knock offs of performer heads?
Click to expand...

Yes
 

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Aug 12, 2017
#13
  • Aug 12, 2017
  • #13
Dan02gt said:
SVEs are Chinese knock offs of Pro Comp heads. So there is a quality concern there. However, a friend of mine installed them in his '94 GT and has been really happy with them. He spent a good about of time on the phone with LMR talking about them. LMR stands behind them 100% and several of their employees run them on their personal cars. Only time will tell how the valve train holds up.
Click to expand...
So sve's or the summit aluminum heads I posted are are good deal? Just got a GT40 upper and lower, c&l 76 for 24lb injectors as well as 24lb injectors so i want to just add heads at the same time if I'm removing everything. I'd even do the cast iron GT40s non P. The guy I bought my goods from has some aluminum GT40s he is going to pull that are very clean off a donor 5.0 he bought. He said 4-500 possibly depending what shape they are actually in. What would you all go for? This is what I added today! They control arms need new bushings but for 20 bucks couldn't pass. And yes my hatch shocks are blown reason for that big ass pvc pipe
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Aug 12, 2017
#14
  • Aug 12, 2017
  • #14
No to SVE or parts brand aluminum heads. No to CL meter, No to cheap control arms.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,131
10,748
213
polk county florida
Aug 12, 2017
#15
  • Aug 12, 2017
  • #15
I'm jealous of your hatch prop pipe.
 

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Aug 12, 2017
#16
  • Aug 12, 2017
  • #16
Those aluminum GT40s would be the way to go if they are in decent shape and you can get them for the $400-500. I would still have a machine shop check them out.
 
Reactions: General karthief
You must log in or register to reply here.

Similar threads

G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
599
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Removing speedo cable from the VSS
  • 91AOD5.0LX
  • Mar 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
91AOD5.0LX
S
5.0 Rebuild
  • smittys7up
  • Nov 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 16, 2026
keel
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
467
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?