gt40p milled .025 do i need different pushrods

[daryl_db]

I am in the process of installing my gt40p heads that i had milled .025 and tfs stage 1 cam with 1.6 rockers. Do i need to order new pushrods or will the stock ones work?

Thanks

 

[Wallzy]

It's hard to say, you'll really have to put it together and check out the geometry of the valve train.

 

[PUNISHER RACING]

+1 on the check first, measure twice buy once

 

[lang williams]

i had mine milled .040, heard this was the safe limit, clayed them to be safe an had to enlarge the notches on the intake side to clear the larger 1.84 valves.

 

[BYRDPE]

Good info....
http://www.carcraft.com/techarticles/116_0401_setting_pushrod_length/index.html