Guys, i went to 2 shops and they both told me around 2000. They said once guy said gears and install it self cost 920 and the rest for the tq install. the other shop told me 940 for the parts and 880 for install. What do you guys think. I live around the chicago area so if u guys know n e good place that arent that much money plz help. thanx for ur help guys
guys how much should gear's and trq converter cost
- Thread starter cyberwolf1986
- Start date
rustang94
Member
I paid $595 for my converter and $120 for install that was with a deep sump tranny pan. and ford3:55 gears with $50 for install Its good to work at a ford dealer
I would expect $300 to maybe $400 on the gear install. Especially if you are replacing all the bearings too (which is a good idea). Parts are gonna be close to $300, again if you are doing the bearings. So I could see $600 to $800 there.
Don't know about slush boxes.
Don't know about slush boxes.
rustang94
Member
rustang94
Member
94-302-vert
Active Member
I paid $230 for isntall on my gears. Plus $300 in parts (rebuild kit plus gears)... But this was a backwoods guy.... He did the job "almost" right"... I ended up fixing it myself after...
For the convertor. I had to pay for the tq convertor to pump seal to be changed in my dakota in like 1999 (before i started getting into doing stuff myself) and it ran me about $150 or so (3 hours) at a dealer... So figure $200-$250 for labor on the tq convertor, plus fluids and the convertor itself.
Hope this helps...
For the convertor. I had to pay for the tq convertor to pump seal to be changed in my dakota in like 1999 (before i started getting into doing stuff myself) and it ran me about $150 or so (3 hours) at a dealer... So figure $200-$250 for labor on the tq convertor, plus fluids and the convertor itself.
Hope this helps...
94Blue302GT
Member
I just sold a Torque converter on Ebay for 30 bucks plus 20 S&H, which was my loss because the shipping to california (why do i always forget to do the calculated shipping?) was 48.95.
Buy 3.73's on ebay as well. Look for truck gears. Guys with F150's swap out for 4.10's or 4.56's.
Lee
Buy 3.73's on ebay as well. Look for truck gears. Guys with F150's swap out for 4.10's or 4.56's.
Lee
94Blue302GT
Member
gears you can do yourself pretty easily with a friend, some beer and an afternoon. As for the torque converter, i'm on the south side, closer to Indiana. I know a couple of places down here. PM if you're still looking for a place.cyberwolf1986 said:
I live in Lansing, IL.
Lee
gcomfx.com
Founding Member
$565 for an Edge Racing Converter. www.edgeracingconverters.com
Talk to Andre, tell him I sent you... see if he'll cut you a deal on shipping or something.
[email protected]
that would knock at least $100 off the price... other than that the 1509 after tax isn't too bad.
Talk to Andre, tell him I sent you... see if he'll cut you a deal on shipping or something.
[email protected]
that would knock at least $100 off the price... other than that the 1509 after tax isn't too bad.
