h/c/i question

ALMOSTFINISHED

Member

Jan 8, 2004

315

0

17

Westchester County NY

Jun 27, 2004

#1

• Jun 27, 2004

• #1

Anyone know what kinda hp and trq figures on an 88 gt using afr 165's, tfs stage one cam, tfs trackheat upper and lower and a 65mm t-body. I have equal length shorties, off-road h-pipe and flowmasters. Also do i need different length puishrods if i use the afr 165's and the tfs stage 1 cam??

thanks

Nick

 

A

autoXr1

Founding Member

May 3, 2001

1,838

0

0

Michigan

Jun 27, 2004

#2

• Jun 27, 2004

• #2

I'm going to suggest that you speak with Ed Curtis at FlowTech Induction (FTI). He's pretty well known for his knowledge of AFR and TFS combos. www.flowtechinduction.com

 

Wasim05

New Member

Apr 5, 2003

273

0

0

Pflugerville, TX

Jun 27, 2004

#3

• Jun 27, 2004

• #3

dude, dont waste your time with that little cam on those kind of heads. if i were you, go with this combo, its tried anf proven to work, and will net you at least 325+ rwhp out of a 302/306.

1) afr 165cc heads
2) holley systemax II intake
3) CROWER 15512 CAM!!!

more than a couple of friends run that combo, and are in the mid 12's on motor and all over 330rwhp with supporting componenets. one of them runs that combo carbed, except with a fully ported edelbrock performer rpm gap intake, a holley 750carb, and a electric pump.. and made 368rwhp/360rwtq on the motor and ran a 11.94 @ 114 in a 2900 lb coupe. telling you, that combo is the way to go.

 

90mustangGT

I felt sorry for girls because

Founding Member

Jan 15, 2002

2,773

17

89

Dallas, GA

Jun 27, 2004

#4

• Jun 27, 2004

• #4

I know a guy running that combo but a performer EFI intake and he runs pretty good. For some reason his cam has worse drivability than the B cam I have. He doesn't run any faster than I do either.

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Jun 27, 2004

#5

• Jun 27, 2004

• #5

maybe 700???? prob more though.

 

maverick0716

Founding Member

Jan 12, 2002

3,924

0

56

Chilliwack, BC, Canada

Jun 27, 2004

#6

• Jun 27, 2004

• #6

What injectors do you have? If they're something around 24#'s then I would guess around 310 rwhp

 

ALMOSTFINISHED

Member

Jan 8, 2004

315

0

17

Westchester County NY

Jun 27, 2004

#7

• Jun 27, 2004

• #7

hey, cool thanks for all the inputs, i have been going back and forth on which way i wanted to go on this set-up. hopefully it'll be nice once i finish it. thanks everybody

Nick

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Jun 27, 2004

#8

• Jun 27, 2004

• #8

I think you would need the 6.250" pushrods...