Depends on the offset of the rims. I have 01 GT rims and they don't stick out too far.
The problem I ran into was the length of the tie rods. Because the tie rod end mount on the spindle is much further out than the 89-95 spindle, you end up "unscrewing" the outer tie rods so far that not much of the inner tie rod end is threaded into it. You need to make sure you center the inner tie rods perfectly, other wise you will have more inner screwed into one of the outers and barely enough of the other side screwed into the other outer.
Even then, you don't have much inner on either side. I don't know how compatible the inners or rack are from 96+ to Fox....but that might be an option.