• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Head Dilema

  • Thread starter Thread starter 1Slow90coupe
  • Start date Start date Nov 14, 2005
1

1Slow90coupe

New Member
Oct 18, 2005
145
0
0
Nov 14, 2005
#1
  • Nov 14, 2005
  • #1
Here is the set up. I know the ??? has been asked a million times.

I have the following....
90 302 stock motor with
BBK CAI
Headers
Off road h pipe
MAC mufflers
355 gears
pro 5.0 shifter
drag radials
150 NX wet shot
elec fan
battery in trunk
sway bar removed
Best ET to date 12.52

I know I should be doing a little better than that, but I am not the best driver. I am consistent with my 12.5s though.

Over the winter I am going to swap the heads and cam. I do not have the $$$ to do the rest of the top end so that is where I am going to start. Thinking AFR 165's with a few of the extras(upgraded springs, and pollish work) with a E303 cam or maybe a little bigger. I still want decent idle.



Suggestions are welcome.

What would this get me? Last dyno was 308HP and 455ftlp tq to the wheels with the 150 shot. 206/3?? with out it.
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Nov 14, 2005
#2
  • Nov 14, 2005
  • #2
Do not go with the e-cam. It's outdated. There are much better cams out there now, that still retain great idles, and make a lot more power. Those 165's flow hella good, so you'll want a rather aggressive cam to go with them. Somebody recommended a Crane 2030 or 2031 a long time ago to me. It's comparable to the tfs stage 1, which makes good power, but it does have a lopey idle. Just don't go with the e-cam, lol. It's notorious for causing idle issues anyway.
 

mustangramair

Member
Feb 24, 2004
326
0
17
Iowa
Nov 14, 2005
#3
  • Nov 14, 2005
  • #3
I agree with Chris, the FMS cams are good but there are better choices. I would also go with something else, i always feel like i am promoting the TFS cam, but it is a good cam and it is cheaper than the FMS cams. So you are not getting new lifters or pushrods? Are you getting a different intake? Those heads will be really restricted if you use the stock intake. Also, i think those are some pretty good times! ~Nick
 

aleborjas

New Member
Sep 11, 2005
610
0
0
Nov 15, 2005
#4
  • Nov 15, 2005
  • #4
stay away from ford cams B,E,F=caca, get stage 1 TFS or XE266HR cams
 
1

1Slow90coupe

New Member
Oct 18, 2005
145
0
0
Nov 15, 2005
#5
  • Nov 15, 2005
  • #5
mustangramair said:
I agree with Chris, the FMS cams are good but there are better choices. I would also go with something else, i always feel like i am promoting the TFS cam, but it is a good cam and it is cheaper than the FMS cams. So you are not getting new lifters or pushrods? Are you getting a different intake? Those heads will be really restricted if you use the stock intake. Also, i think those are some pretty good times! ~Nick
Click to expand...

Thanks for the congrats.

Unfortunately I don't have the $$ right now to do the top end. I am just trying to find the best place to start. My thought was heads. More info on the TFS cam would be appreciated.
 

STANGateURlilSS

Founding Member
May 2, 2002
716
0
16
USA & SANDBOX
Nov 15, 2005
#6
  • Nov 15, 2005
  • #6
i also agree the tfs stage 1
 

soontobefastfox

Member
Nov 15, 2005
275
0
16
Troy, Michigan
Nov 15, 2005
#7
  • Nov 15, 2005
  • #7
I would talk to comp cams and have them custom grind you a cam to your h/c/i specs. So you get the most power from your cam.
 

mustangramair

Member
Feb 24, 2004
326
0
17
Iowa
Nov 15, 2005
#8
  • Nov 15, 2005
  • #8
Here are the specs of the cam from the summit website.
Brand: Trick Flow Specialties
Product Line: Trick Flow Track Heat Camshafts for Ford
Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 2,500-6,500 RPM
Intake Duration 050 inch Lift: 221
Exhaust Duration 050 inch Lift: 225
Duration at 050 inch Lift: 221 int./225 exh.
Advertised Intake Duration: 275
Advertised Exhaust Duration: 279
Advertised Duration: 275 int./279 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.499
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510
Valve Lift with Factory Rocker Arm Ratio: 0.499 int./0.510 exh. lift
Lobe Separation (degrees): 112
Intake Valve Lash (in): 0.000
Exhaust Valve Lash (in): 0.000
Computer Controlled: No
Grind Number: HR-224/339-2S-12
~Nick
 
1

1Slow90coupe

New Member
Oct 18, 2005
145
0
0
Nov 15, 2005
#9
  • Nov 15, 2005
  • #9
What do you think about AFR 185s instead of 165s? I will call Crane and get a custom cam.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Nov 15, 2005
#10
  • Nov 15, 2005
  • #10
The stage 1 TFS is no better than an E or the 2031 listed above.
What makes people think it's good i have no idea. Especially for a set of AFR's. There's a reason why the cam is $139 new.

And call comp and get a custom, not crane.

You may lose velocity with 185's on such a small engine.

Personally i think if you are hard up for money for the project, get wedges or edelbrock rpms and put the extra money towards an intake. There's not much justification for the xtra $300 afr's cost.
 
You must log in or register to reply here.

Similar threads

Engine Heads and how to buy
  • Dontknowchit
  • Aug 16, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
28
Views
2K
Fox 5.0 Mustang Tech Aug 24, 2025
Noobz347
Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
981
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
910
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
I
Engine What Aluminum Heads???
  • Iceman1998
  • Sep 8, 2024
  • Fox 5.0 Mustang Tech
Replies
19
Views
2K
Fox 5.0 Mustang Tech Sep 15, 2024
Noobz347
V
pushrod 5.0 (MILD/ Torque) turbo build for an old scout II help
  • vz58
  • Apr 21, 2024
  • Other Auto Tech
Replies
11
Views
2K
Other Auto Tech Jan 21, 2026
Flyboy60
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?