• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Header Gasket Replacement

  • Thread starter Thread starter MahFiVeOh
  • Start date Start date Sep 16, 2007

MahFiVeOh

Founding Member
Apr 26, 2002
531
9
49
Ontario, Canada
Sep 16, 2007
#1
  • Sep 16, 2007
  • #1
Well...I finally tracked down my exhaust leak....i hope.I was just wondering about a few things.I did a search and found that people like to use Felpro1415 gaskets as replacements for the crappy paper gaskets.I also saw that someone recommended using locking headerbolts, i have never heard of these and was wondering what brand or type i should get.When i do decide to do this next w/e i was wondering about the existing header bolts that are on there now, do they come out easy or are they a b1tch to get out.The reason i ask is because i really dont want to break one off in the process.If you know any other "tips" to make this job a bit easier let me know.
Thanks.
 

jtfairlane

New Member
Mar 5, 2006
468
3
0
Sep 16, 2007
#2
  • Sep 16, 2007
  • #2
Spray some wd-40 or other penetrant on the header bolts (with the exhaust cool) before removal to lessen the chance of breaking off a rusty header bolt.

Whether or not they come out easily really depends on factors such as age, amount of corrosion, etc. When I first replaced my factory headers the factory bolts came out easily, but I have a CA car with little to no corrosion, etc.

If you want to use locking header bolts, than the company you should look up is Stage 8 Locking Fasteners. Link Below:

http://www.stage8.com
 

fastford91

New Member
Aug 15, 2006
254
1
0
Niagara ,Ontario, Canada
Sep 16, 2007
#3
  • Sep 16, 2007
  • #3
to get them out spray some penetrating oil on them with the engine cold! tap the ones you can with a hammer to "set them up" this helps in losening rusted parts! when putting them back in or putting new ones in coat them with some anti seize on the threads this will ensure they dont fuse especially if you have aluminum heads! thats about it! oh and after you run the car a couple times you should retorque the bolts! as they will losen off from the heat then if you have the locking bolts you can lock them! think thats all !
 

MahFiVeOh

Founding Member
Apr 26, 2002
531
9
49
Ontario, Canada
Sep 16, 2007
#4
  • Sep 16, 2007
  • #4
Any recomendations on the gaskets?
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Sep 16, 2007
#5
  • Sep 16, 2007
  • #5
the felpros you listed are good gaskets.

As far as locking header bolts I had a set of stage 8 locking header bolts on my 93. They worked great but were a little pricey.
 
F

Fox8950

Member
Jun 29, 2007
247
2
18
Sep 16, 2007
#6
  • Sep 16, 2007
  • #6
I spent the extra cash and put Stage 8 bolts and copper gaskets on just so I knew they would stay put. I hate working on exhaust
 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
Massachusetts
Sep 18, 2007
#7
  • Sep 18, 2007
  • #7
MahFiVeOh said:
Any recomendations on the gaskets?
Click to expand...

Remflex!
 

68keyblr

20+ Year Stangneter
Mar 17, 2003
946
20
49
Arizona
Sep 18, 2007
#8
  • Sep 18, 2007
  • #8
Fox8950 said:
I spent the extra cash and put Stage 8 bolts and copper gaskets on just so I knew they would stay put. I hate working on exhaust
Click to expand...

Did you have any problems getting the copper gaskets to seal?

I tried them on my 331 fresh build and they didn't seal worth a crap. Replaced them with FelPro 1415's and they work excellent!
 
You must log in or register to reply here.

Similar threads

9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
G
Engine Pushrod Length Question
  • germain101
  • Sep 22, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
751
Fox 5.0 Mustang Tech Sep 25, 2025
Noobz347
Paint and Body Frame rail dimensions
  • keel
  • Jan 30, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 13, 2026
keel
E
4.6l auto to 5.4l 6 speed
  • EastanF5
  • Jan 22, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
260
SN95 4.6L Mustang Tech Jan 22, 2026
EastanF5
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?