header help...

1fastsn95

New Member

Apr 22, 2005

122

0

0

Carthage, tn

Aug 25, 2008

#1

• Aug 25, 2008

• #1

Im looking for a new set of headers for my 94. I have Hedman equal lengths and I hate em! They burn up my clutch cables, they take up too much room, and they leak. Since my EGR and smog stuff is disconected, can I use pre-94 type headers? Or would I be better to by 94-95 type and weld shut the EGR tube? Thanks!

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Aug 25, 2008

#2

• Aug 25, 2008

• #2

If you do run end up running headers with the EGR bung

Why not just get one of those caps at your local hardware store

Then if you ever need the bung or want to sell them to someone who
might want it ... Well ... its always better to have more options

I'm pretty sure Fox shortys would fit

Grady

 

Y

YELLOW 94

Founding Member

Nov 19, 1999

428

0

17

Rio Rancho NM

Aug 25, 2008

#3

• Aug 25, 2008

• #3

I tried a set of bbk 86-93 headers and could not get the h pipe to seal on the passanger side header. The flow tech headers (94-95) I had on it sealed just fine. It might of just been my h pipe, but not sure. Good luck

later
Orlie

 

Pokageek

Active Member

Jun 10, 2005

2,767

0

46

MA, USA

Aug 25, 2008

#4

• Aug 25, 2008

• #4

A good muffler shop can correct that.... but then it has to be worth the $$ to you.

 

Y

YELLOW 94

Founding Member

Nov 19, 1999

428

0

17

Rio Rancho NM

Aug 26, 2008

#5

• Aug 26, 2008

• #5

Pokageek said:

A good muffler shop can correct that.... but then it has to be worth the $$ to you.

Click to expand...

I just put the flow tech headers back on. They fit way better than the bbk's.

later
Orlie