• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

help fast please

  • Thread starter Thread starter 91stangy
  • Start date Start date Oct 15, 2005
9

91stangy

Member
Jun 11, 2003
116
0
16
Oct 15, 2005
#1
  • Oct 15, 2005
  • #1
ok me and my friend built our own stang using an 87 donor chassis and a 90 ford 302 crate motor out of his wrecked car keeping the stock wiring from the 87 and using his a9p ecu from the 90 and then converting to mass air, also we used the 87's 5 spd when the 90 was an auto... now he just had the 3.73 and the trac loc rebuilt and it also has been raining ever since then so he hasnt gotten to test it out. we just got done taken it on a test run and when he launches from a roll in first gear it launches to about 3500rpm then power surges and the car shuts off, or it will bog and then catch itself and come back. however, it doesn't do this in second gear rolling launch!
 

Killer50stang

New Member
May 11, 2004
632
0
0
Oct 15, 2005
#2
  • Oct 15, 2005
  • #2
91stangy said:
ok me and my friend built our own stang using an 87 donor chassis and a 90 ford 302 crate motor out of his wrecked car keeping the stock wiring from the 87 and using his a9p ecu from the 90 and then converting to mass air, also we used the 87's 5 spd when the 90 was an auto... now he just had the 3.73 and the trac loc rebuilt and it also has been raining ever since then so he hasnt gotten to test it out. we just got done taken it on a test run and when he launches from a roll in first gear it launches to about 3500rpm then power surges and the car shuts off, or it will bog and then catch itself and come back. however, it doesn't do this in second gear rolling launch!
Click to expand...

Sounds fuel related possibly. Have you checked your air fuel ratio? Timing, etc?
 
T

TooFoxy

New Member
Dec 17, 2004
58
0
0
Charleston SC
Oct 16, 2005
#3
  • Oct 16, 2005
  • #3
make sure that the ground wire next to the computer is tight "bump" i had the same problem and it had just worked its self loose and w/ a real hard luanch i guess it would come enough uncontacted that it'd die out really annnoying problem took me 2 weeks to figure it out
 
You must log in or register to reply here.

Similar threads

Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
S
please help! not a typical coyote swap
  • sarver24
  • Nov 15, 2024
  • Other Auto Tech
Replies
4
Views
874
Other Auto Tech Nov 15, 2024
manicmechanic007
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Engine Throwing codes 94, 33, 34, 44, and sporadic engine shutoff.
  • Ryu
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
1K
Fox 5.0 Mustang Tech Sep 13, 2026
Noobz347
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?