help fast please

91stangy

Member
Jun 11, 2003
116
0
16
ok me and my friend built our own stang using an 87 donor chassis and a 90 ford 302 crate motor out of his wrecked car keeping the stock wiring from the 87 and using his a9p ecu from the 90 and then converting to mass air, also we used the 87's 5 spd when the 90 was an auto... now he just had the 3.73 and the trac loc rebuilt and it also has been raining ever since then so he hasnt gotten to test it out. we just got done taken it on a test run and when he launches from a roll in first gear it launches to about 3500rpm then power surges and the car shuts off, or it will bog and then catch itself and come back. however, it doesn't do this in second gear rolling launch! :shrug:
 
91stangy said:
ok me and my friend built our own stang using an 87 donor chassis and a 90 ford 302 crate motor out of his wrecked car keeping the stock wiring from the 87 and using his a9p ecu from the 90 and then converting to mass air, also we used the 87's 5 spd when the 90 was an auto... now he just had the 3.73 and the trac loc rebuilt and it also has been raining ever since then so he hasnt gotten to test it out. we just got done taken it on a test run and when he launches from a roll in first gear it launches to about 3500rpm then power surges and the car shuts off, or it will bog and then catch itself and come back. however, it doesn't do this in second gear rolling launch! :shrug:

Sounds fuel related possibly. Have you checked your air fuel ratio? Timing, etc?
 
make sure that the ground wire next to the computer is tight "bump" i had the same problem and it had just worked its self loose and w/ a real hard luanch i guess it would come enough uncontacted that it'd die out really annnoying problem took me 2 weeks to figure it out :(