Help! Ipulled my front springs and I cant get them in!

hollant

Founding Member
Mar 30, 2002
141
0
17
Puyallup, WA
I have already ruined my father in laws spring compressors... They were too long, but I tried to make them work and I screwed them up... Does anybody in the Puyallup, Tacoma area have a spring compressor they know works on a fox mustang? Any good samaratins out there? Case of frosty beverage to whoever saves me!!!
 
With the front of the vehicle up on jack stands and the lower control arm still attached to the spindle remove the 2 inner control arm bolts. Lower inner side of lower control arm, insert spring into control arm, place floor jack onto center edge of inner control arm and jack up into place. Be carefull!

I have done my good deed for the day. Now Jeff won't have to get on here and lecture you on how you are going to kill yourself with the spring! :rlaugh:
( inside joke )
 
From experience, it is VERY difficult to do this with stock springs. Aftermarket are not so bad (shorter), but without using the above mentioned method, its not gonna be easy. Leverage is just not on your side. I would keep trying those inners while you wait.