ok, i am installing a custom cam. I have ported e7's. I would like to install new 1.6 roller rocker arms. I really need to know if i need to install roller rocker arms or can i just install the factory rocker arms with the custom cam specs are listed below. i understand i have pedestal rocker arms and i can simply install new pedestal roller rocker arms, but can i also install 5/16- to 3/8-inch studs with pushrod guideplates and hardened pushrods and install 3/8 in stud mount roller rocker arms is it that simple or am i missing something?
LSA: 114
Duration: 280 advertised.
Duration @ 50: 229 for I/E
Lobe lift I and E: .321 gross
Valve Lift w/1.6 Rockers: .514
Valve Lift w/1.7 Rockers: .546
Intake Lobe Centerline: 110
LSA: 114
Duration: 280 advertised.
Duration @ 50: 229 for I/E
Lobe lift I and E: .321 gross
Valve Lift w/1.6 Rockers: .514
Valve Lift w/1.7 Rockers: .546
Intake Lobe Centerline: 110