Well ive had a few posts here in the last few days about my intake gasket install...I got it all done and buttoned up and go to put in the distributer (what the problem probobly is). So i line the balancer up at TDC, put the distributer in with the rotor pointing at number1 spark plug, pulled spout, started car and it wouldnt start (crank no start). But during cranking i got the pointer lined up at 10* and put spout back in. Still wont start. Checked for spark, OK. theres fuel (dont know pressure), and it wont start over. It will backfire after about 10 seconds of cranking, not badly but you can hear it. Any ideas?