Help with 351w

kosovo37

New Member
Apr 1, 2007
13
0
0
Hi friends on stangnet.com, i´m sorry for my english, i need help with my 351w in my 20th annyversary stang, i want a good setting for street and drag race

i have a 351w

trickflow camshaft 542/563 2500-6000 rpm
manley valves 1.600 exhaust and 1.094 intake
7581 edelbrock air gap intake manifold
trickflow spring recomended for this camshaft
0.30 piston ( originals)
Canton Racing oil pan
Msd distribuitor coil and ignition system


but i don´t know what to do with the best setting for drag and street..


I need your help and thank you...
 
ohhh, i, sorry for my english, i need make a choise on pistons and other configurations, i want a car that makes 12.20 aprox, and i need assistance with how can i do, what i have to buy, forget pistons, brand?,

I have this pieces

trickflow camshaft 542/563 2500-6000 rpm
manley valves 1.600 exhaust and 1.094 intake
7581 edelbrock air gap intake manifold
trickflow spring recomended for this camshaft
0.30 piston ( originals)
Canton Racing oil pan
Msd distribuitor coil and ignition system


what do you think that i can make with this??? stroker or a good 351, and i have to choose in gearbox too, i have a c4, an aod, and a t5, this is for drag race and street aplications..
 
Actually, your english is pretty decent... don't sweat it...


I can't speak for JE pistons, but Probe quality is excellent.

Other than the brand, just watch the compression ratio.
Around 10.5:1 is about max on the fuels we have here...


jason
 
Yes a 10.5 to 1 compression ratio is very nice. BTW I think you are talking about 1.94 intake valves. For a 351w or a stroker based on that block those valves are a little small. A set of AFR 185 heads would work nicely so would a set of vic jr's.
The afr 185's have a 2.02 intake and a 1.6 exhaust. The vic jrs have a 2.05 intake and a 1.6 exhaust. I'm not sure which heads you are planing on going with but you want to allow your 351w to breathe.