• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Here's a pretty nice underhood filter for you centri blower guys

  • Thread starter Thread starter TonyG
  • Start date Start date Oct 20, 2008
T

TonyG

Founding Member
Apr 12, 2002
200
0
17
Owings Mills, MD
Oct 20, 2008
#1
  • Oct 20, 2008
  • #1
Found a pretty nice underhood filter for my S-Trim, that I thought I’d share with you guys.

Since around 2001, I’ve been using a powerpipe with a cone filter in the fenderwell. The outlet pipe from my FMIC passes through the same fenderwell, so things get pretty cramped. Another problem is that the filter gets dirty very quickly. After about 5000 miles its filthy.

So I’ve been looking for an underhood filter for everyday use, and came across this one from K&N (RC-5040). Its pretty big and fills the space perfectly:




Now, I’ve always been a little reluctant to do this because of the notion of the filter receiving “hot” underhood air (the whole premise of cold air intakes). But in this case, the filter is so close to the front of the car, I think its gets plenty of fresh air while driving. For example, it was a pretty cold night tonight, and after my 40 mile commute from work I immediately opened the hood and felt the filter. The metal part of the filter that you see in the photo was ice cold, which tells me that it gets a lot of air at highway speeds. In fact I think one of those open bottem funnel filters would actually be ideal. I happen to have one -this one is made by Vibrant Racing:



I’m going to be comparing these filters at the track, along with no filter and a homemade direct ram air rig that I made. Probably none of this will make a difference in ET/MPH, but it’ll keep me temporarily entertained.
 

Attachments

  • IMGP0749.webp
    66.8 KB · Views: 203
  • IMGP0750.webp
    42.2 KB · Views: 292

02nightmaregt

To hell with your Mustang, I want to see your HOG!
Jul 1, 2007
513
4
19
Southern Indiana
Oct 20, 2008
#2
  • Oct 20, 2008
  • #2
Looks pretty sweet dude. I'll bet that opened ended filter gets tons of cool air, due to its locatation, and the time of year it is. Prizops!
 

Superhereaux

chicks make me feel inadequate
Founding Member
Jul 30, 2002
538
3
59
South Texas
Oct 20, 2008
#3
  • Oct 20, 2008
  • #3




now :Track:
 

Green&GoldGT

Member
Aug 1, 2005
302
0
17
Virginia
Oct 21, 2008
#4
  • Oct 21, 2008
  • #4
I suggest you use an S&B filter. K&N's have oil on them, and being sucked in its going to negatively effect performance and increase chances of detonation. I don't want to get into the filter argument, just my opinion.
 
T

TonyG

Founding Member
Apr 12, 2002
200
0
17
Owings Mills, MD
Oct 21, 2008
#5
  • Oct 21, 2008
  • #5
Green&GoldGT said:
I suggest you use an S&B filter. K&N's have oil on them, and being sucked in its going to negatively effect performance and increase chances of detonation. I don't want to get into the filter argument, just my opinion.
Click to expand...

I have a blow-thru set-up, and my maf is pretty far away from the filter (its just past the intercooler), so I'm not really worried about that. Also, there's no trace of any oil residue in any of the induction piping, and I've been using K&N filters on this car since 1999.

But generally, I understand your point. You just have to make sure the filter isn't over-oiled.
 

Mustang92

SN's #1 1%er
Jun 6, 2001
6,467
2
79
South Florida
Oct 21, 2008
#6
  • Oct 21, 2008
  • #6
Have you noticed if you are making more boost with that set up over the powerpipe set up? I have the procharger pipe on mine and personally hate the small filter but I don't want to add any boost as I'm already pushing the limits of a stock engine.

Bill
 
J

justinschmidt1

Member
Jun 15, 2005
349
0
16
Oct 21, 2008
#7
  • Oct 21, 2008
  • #7
Thats funny...I was thinking about doing this but was told it would suck hot air.

But then again the stock procharger pipe I have is like 2.5 inch and isnt sucking air from a better place.

I want to do it but theres a lot less room on my 96...I may haave to move the coolant resorvoir over like an inch to even get a filter on.
 

DBMSTNG

I fantasize about it being BIG!
Founding Member
Apr 23, 2002
2,120
0
56
not quite here
Oct 21, 2008
#8
  • Oct 21, 2008
  • #8
i'd like to see a datalog of IATs with a standard setup and that.
 
J

justinschmidt1

Member
Jun 15, 2005
349
0
16
Oct 21, 2008
#9
  • Oct 21, 2008
  • #9
DBMSTNG said:
i'd like to see a datalog of IATs with a standard setup and that.
Click to expand...



Are you saying a standard setup as in with no intercooler?


I would imagine with an intercooled setup the iat's would stay about the same with that filter on the inlet vs. a intake pipe.
 

xseler8

Member
May 4, 2004
619
0
17
Montgomery County,Pa.
Oct 21, 2008
#10
  • Oct 21, 2008
  • #10
Thanks for posting. Both look good
 
You must log in or register to reply here.

Similar threads

98 GT PI Swapped Engine Fires, Dies Immediately NOT PATS
  • MMccPerformance
  • Dec 2, 2023
  • SN95 4.6L Mustang Tech
Replies
3
Views
2K
SN95 4.6L Mustang Tech Dec 20, 2023
Yel2002GTAuto
Y
Progress Thread "Alter Ego" White 1993 LX 5.0 5spd
  • idareu
  • Sep 9, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
42
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 19, 2025
idareu
Meet Snow Beast
  • fun331
  • Mar 2, 2023
  • 2007 - 2014 Shelby GT500 Tech
Replies
7
Views
1K
2007 - 2014 Shelby GT500 Tech Nov 12, 2024
fun331
C
Progress Thread 2004 Comp Orange GT
  • ctandc
  • Jun 26, 2023
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3
Replies
56
Views
5K
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
ctandc
C
P
For Sale 1996 Vortech Supercharged Cobra Convertible 80K Miles for sale - many upgrades - $10,500
  • pimpfish
  • Oct 24, 2018
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
2K
SN95 Mustangs For Sale (1994-04) Dec 28, 2018
pimpfish
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?