Holy spike in tire batman!

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,251

17,937

224

Massachusetts

Jul 4, 2008

#1

• Jul 4, 2008

• #1

Felt a weird vibration in my right rear the last few days at highway speeds. I got home and checked the tire and this is what I found. Sucker is maybe 3/8" in diamter.

Not gonna even other to plug it. Putting a spare 17" wheel on and buying a new set of all 4 tires within the week. Nice timing since the tires were pretty much almost done anyway. I'll update when i pull that bad boy out

 

Attachments

• DSC00135.webp

  38.7 KB · Views: 261
• DSC00136.webp

  30.2 KB · Views: 222

SaleenGT2001

Well-Known Member

Jul 18, 2005

2,811

4

58

Four Oaks NC

Jul 4, 2008

#2

• Jul 4, 2008

• #2

tires are dry rotted, time to replace anyways

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,251

17,937

224

Massachusetts

Jul 4, 2008

#3

• Jul 4, 2008

• #3

I wonder if it would be safe to do a fare-well burnout with that spike in there????

 

BurningRubber

10 Year Member

Dec 6, 2004

1,865

24

58

Jul 4, 2008

#4

• Jul 4, 2008

• #4

Ive had a nail stuck in mine for a long time.

Stupid little nail causes me to add air every other couple of days, lol.

Not going to bother pulling/patching either as my local carwash has free air and my Sumi's are damn near shot.


And go for the farewell burnout...

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,251

17,937

224

Massachusetts

Jul 4, 2008

#5

• Jul 4, 2008

• #5

well this isn't really a nail. It's huge!!

 

D

darkside03gt

Member

Feb 19, 2007

851

8

18

Sacramento CA

Jul 4, 2008

#6

• Jul 4, 2008

• #6

thats pretty big but i've seen bigger. I had a huge bolt in one of my tires and a friend of mine had a screwdriver in his tire.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,251

17,937

224

Massachusetts

Jul 4, 2008

#7

• Jul 4, 2008

• #7

Actually, it is octagonal....like a screwdriver. Makes me wonder if someone tried to damage my tire and the handle broke off.

I'm curious to see what the other sode of it looks like.

 

Stark77

Member

Jun 11, 2008

501

0

16

Tallahassee, FL

Jul 4, 2008

#8

• Jul 4, 2008

• #8

YES ITS SAFE - AND TAKE LOTS OF PICTURES! After driving out to the RC flying field a few months back and then washing the car I noticed a gigantic screw in my back right tire. I figured it was an omen that I needed not just one new tire, but 4. I followed my instincts. Before that though, I modified my rear tires to be slicks via high RPM's and 0MPH. Hey, if you don't do a burnout and kill the rubber the guys at the shop will.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,251

17,937

224

Massachusetts

Jul 4, 2008

#9

• Jul 4, 2008

• #9

Stark77 said:

Hey, if you don't do a burnout and kill the rubber the guys at the shop will.

Click to expand...

No they won't. After catching some tire guy doing a burnout with my NEW tires a few years back, I simply bring them the rims now.

I have a spare set of 17" mustangs wheels off my 5.0. I just swap those on and then bring them the loose wheels.

 

hotmustang331

Active Member

Apr 29, 2004

2,967

3

48

Bastrop,TX

Jul 4, 2008

#10

• Jul 4, 2008

• #10

I wouldnt do a burnout personally. Heated tires get soft and that peg may fly out and beat the crap out of your rear bumper. Take it out and put a tire plug in, then do the burnout

And man those tires have plenty of life left....if you think thats close you should see how I run my tires. I retire mine after the tread goes smooth (not all the way accross but generally after nearly half the tread is smooth)

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,251

17,937

224

Massachusetts

Jul 4, 2008

#11

• Jul 4, 2008

• #11

You should see the front tires...they are past the wear bars and the edges are pretty much flat.


I just don't like mismatched rubber..so i'm doing all 4.

I also bought two new OEM bullitt wheels to replace my two pass side wheels that have minor curbing.

I am that anal

 

BurningRubber

10 Year Member

Dec 6, 2004

1,865

24

58

Jul 4, 2008

#12

• Jul 4, 2008

• #12

I curbed 1 Bullitt hard a couple of months ago.

I was so pissed. I bought new wheels for my Jeep, and to this day they have ZERO curb issues, and zero mis-haps despite being pounded offroad.

I was pissed. I wasnt paying attention the way I should have been and cut the wheel a little too sharp trying to snug up to a curb. I think I will be able to sand it out though if I take my time.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,251

17,937

224

Massachusetts

Jul 4, 2008

#13

• Jul 4, 2008

• #13

They were cheap enough. Ford is closing out on them, so i got them for $100 each. They only have the 03/04 bullitt with the darker spokes however.

I already had two spare bullitt wheels from a friend, so now this will give me 4 spare wheels to mount some autocross tires on

 

Pearl02

Member

Nov 27, 2004

496

0

16

Kansas City

Jul 5, 2008

#14

• Jul 5, 2008

• #14

I 've ran over things like that before. There's a lot of construction work going on in the area where I work. I had to replace one tire because it couldn't be repaired. It sucks. I've also ran over stuff in my Mazda while driving where I work at. Pearl02.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,251

17,937

224

Massachusetts

Jul 19, 2008

#15

• Jul 19, 2008

• #15

UPDATE:



You know...i was kinda wondering where this bit went. It was missing from my kit.


Oh well...new tires and new rims on pass side to replace curbed wheels (I HATE curbed wheels)

 

Attachments

• DSC00183.webp

  48.1 KB · Views: 168
• DSC00179.webp

  40.4 KB · Views: 161

forum155pl

New Member

Jul 11, 2006

520

0

0

the 509

Jul 21, 2008

#16

• Jul 21, 2008

• #16

hahaha.. good ol torx bits.. i sucked one of them into my intake on my first motor.. we should start a club..

i build houses for a living. i carry a full size spare w/ matching rim in my car.. the tire shop loves our non nail picking up asses lol

 

C

cooper

New Member

Dec 9, 2005

96

0

0

Jul 22, 2008

#17

• Jul 22, 2008

• #17

Well no burn out? One of the guys at work a few years ago wanted to race , so i did a burrly burnout tring to hold the brake and gass it with the same foot (5 speed) and just like you me tires were worn . but i diddent know was i had a huge nail in the r/r , the next day al every one could talk about was the fire beeing shot out from the smokey tire