Im in the process of making my own powerpipe for my stang. I have all the elbows/connectors I need to get it in the fender, I just need to have a pipe made with 2 to 2.5 inch rise in it to go under my discharge tube and line up with the hole in the fender.
Anybody know a shop in the Chicago area that could fabricate on for me?
Im making it out of 3.5inch tubing. Im using a 90 degree elbow of the supercharger, then the rise piece to the fender hole, then another 90 degree at the fender hole, then a little straight piece to a 3.5 to 3.0 reducer to my MAF and filter.
Anybody know a shop in the Chicago area that could fabricate on for me?
Im making it out of 3.5inch tubing. Im using a 90 degree elbow of the supercharger, then the rise piece to the fender hole, then another 90 degree at the fender hole, then a little straight piece to a 3.5 to 3.0 reducer to my MAF and filter.