• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Hood Pins "ARE NOT" My Friend

  • Thread starter Thread starter ChromdOutDubs
  • Start date Start date Feb 13, 2008
  • 1
  • 2
Next
1 of 2 Next Last

ChromdOutDubs

Member
Sep 1, 2005
268
1
18
38
Tavares, Florida
home.comcast.net
Feb 13, 2008
#1
  • Feb 13, 2008
  • #1
Well i didn't get to make it to the track tonight, so i decided to go for a little cruise. Well since i just got the MT ET Streets on the car, i figured i would do a little test launch on them. Well i launched and got up to about 80-90 MPH and BOOM! It was dark out, and i didn't realize what had happened instantly, it happened so quick. I had a friend driving behind me and he said he saw it fly up into the air above the power lines.... I'm just lucky it come down and land on another car or cause an accident. Well the damage does suck, but it defiantly could have been a lot worse. It just sucks that i was finally coming to the end of the build on this thing then something else has to happen. It destroyed the hood but I'm really surprised that a fiberglass hood held up that good, the cowl area is crushed and the roof has a huge dent in the center of it. The hood pins rattled out I'm guessing, I always check them before i go anywhere. The only thing is i put the pin through the bottom instead of the top because it doesn't scrap the paint that way, so I'm guessing the rattles loose and fell out the bottom.Well here are some pictures.










View attachment 330439

Enjoy The Pictures.... I know sure did

-AJ
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
314
281
134
Apache Junction, AZ
Feb 13, 2008
#2
  • Feb 13, 2008
  • #2


That sucks. Sorry to hear. That cowl area damage is going to be the biggest PITA of fixing things.
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
34
columbus ohio
Feb 13, 2008
#3
  • Feb 13, 2008
  • #3
there was just a thread on these a day or two ago. :sad:
 

ChromdOutDubs

Member
Sep 1, 2005
268
1
18
38
Tavares, Florida
home.comcast.net
Feb 13, 2008
#4
  • Feb 13, 2008
  • #4
Darkwriter77 said:


That sucks. Sorry to hear. That cowl area damage is going to be the biggest PITA of fixing things.
Click to expand...

It actually wasn't all that bad in person, when i get a new cowl thing it wont look to bad.... I think the roof is gonna suck the most, well actually the hood sucks the most cuz its gonna cost me some money. I'm pretty good with fiberglass so i was thing i might be able to fix it myself.

I'm making this hood a full pin on and getting rid of the back hood brackets and buy different hood pins that cant fall out.... I guess this is what I get for buying cheap ass pins.

-AJ
 
M

MaxTheHooker

New Member
Jan 15, 2008
36
1
0
Feb 13, 2008
#5
  • Feb 13, 2008
  • #5
I don't get why this **** happens so often? i have a fiberglass hood with no pins and a latch.. i've had it up to about 110-120 and i've had absolutely no problems.. same thing goes for every car i've ever owned...?
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
34
columbus ohio
Feb 13, 2008
#6
  • Feb 13, 2008
  • #6
MaxTheHooker said:
I don't get why this **** happens so often? i have a fiberglass hood with no pins and a latch.. i've had it up to about 110-120 and i've had absolutely no problems.. same thing goes for every car i've ever owned...?
Click to expand...

YOUR FOCKED NOW.

you gone done and done it now!


 
D

Dennis86GT

Banned
Dec 19, 2007
2
0
0
Feb 13, 2008
#7
  • Feb 13, 2008
  • #7
ChromdOutDubs said:
Click to expand...

There is your first mistake... you took out the factory latch on a street car. I would NEVER do that. I use hood pins for looks and as a safety net. NEVER would i remove the factory equipment. Sorry to hear about the damage though, good luck on the rebuild!
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
36
CA
Feb 13, 2008
#8
  • Feb 13, 2008
  • #8
ChromdOutDubs said:
Well i launched and got up to about 80-90 MPH and BOOM! It destroyed the hood but I'm really surprised that a fiberglass hood held up that good, the cowl area is crushed and the roof has a huge dent in the center of it.

The hood pins rattled out I'm guessing,
I always check them before i go anywhere. The only thing is i put the pin through the bottom instead of the top because it doesn't scrap the paint that way, so I'm guessing the rattles loose and fell out the bottom.
Click to expand...

I feel for you man... and sorry that it happened to you. but once again I've got to call it operator error!! pins or no pins!
 

LiquidGT

Member
Oct 8, 2007
368
0
16
44
Near STL hell
Feb 13, 2008
#9
  • Feb 13, 2008
  • #9
I plan on putting on some hood pins as well as using my factory latch. I dont like the way they look necessarily I just want them for a safety net. Obviously the factory latching system needs help, two pins on the hood beats hood, roof, cowl, windsheild damage.
 

foxmustangman

Member
Jun 20, 2007
196
1
16
Idaho
Feb 13, 2008
#10
  • Feb 13, 2008
  • #10
ChromdOutDubs said:
I had a friend driving behind me and he said he saw it fly up into the air above the power lines.... I'm just lucky it come down and land on another car or cause an accident.

-AJ
Click to expand...

So I'm confuzzled. It did or did not hit something?
 

ChromdOutDubs

Member
Sep 1, 2005
268
1
18
38
Tavares, Florida
home.comcast.net
Feb 14, 2008
#11
  • Feb 14, 2008
  • #11
foxmustangman said:
So I'm confuzzled. It did or did not hit something?
Click to expand...

It did not cause an accident.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Feb 14, 2008
#12
  • Feb 14, 2008
  • #12
ryan218 said:
YOUR FOCKED NOW.

you gone done and done it now!


Click to expand...

man its, you done gone and done it now! your ghetto it suffering from the lack there of Ryan
 

putnam88

Member
Aug 2, 2006
102
0
17
37
tavares
Feb 14, 2008
#13
  • Feb 14, 2008
  • #13
it sucked pretty bad but then again its not every day your following a friend home and see his hood launch straight up like a rocket. sux man
 

SteedaGT9150

Advanced Member
Nov 10, 2004
1,351
59
68
Maryland
Feb 14, 2008
#14
  • Feb 14, 2008
  • #14
just ****
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Feb 14, 2008
#15
  • Feb 14, 2008
  • #15
That blows!!!!!!!!!!! I've always liked your car, red, clean, sleek, sleeper look. Get it fixed and come on back!!!
 

fiveohlxhatch

New Member
Sep 18, 2007
27
0
0
Feb 14, 2008
#16
  • Feb 14, 2008
  • #16
GL with repairs.
 

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Feb 14, 2008
#17
  • Feb 14, 2008
  • #17
post a picture of your hood pins.

i do not see how they "rattled loose." most pins have an indent in them that "locks" them in place, or a hoop that goes over the top of the pin. it sounds like you installed them incorrectly.

the damage sucks, but next time i'd install them how the directions say to
 

ChromdOutDubs

Member
Sep 1, 2005
268
1
18
38
Tavares, Florida
home.comcast.net
Feb 14, 2008
#18
  • Feb 14, 2008
  • #18
1991vert said:
post a picture of your hood pins.

i do not see how they "rattled loose." most pins have an indent in them that "locks" them in place, or a hoop that goes over the top of the pin. it sounds like you installed them incorrectly.

the damage sucks, but next time I'd install them how the directions say to
Click to expand...

You cant really install them wrong... Its a pin through a hole.... goes either one way or the other.

But I'm now thinking someone would have to stole them when the car was sitting in the Target parking lot. I know they were in when i first got in the car at my house, so they either were stolen or rattled out, but like someone else said its almost impossible for them to come out.

-AJ
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
314
281
134
Apache Junction, AZ
Feb 14, 2008
#19
  • Feb 14, 2008
  • #19
ChromdOutDubs said:
You cant really install them wrong... Its a pin through a hole.... goes either one way or the other.

But I'm now thinking someone would have to stole them when the car was sitting in the Target parking lot. I know they were in when i first got in the car at my house, so they either were stolen or rattled out, but like someone else said its almost impossible for them to come out.

-AJ
Click to expand...

I'd actually be pretty inclined to believe this theory more than others. It seems a virtual impossibility to ever have a nice car without some a-hole feeling compelled to screw it up for you in some way, either by keying it, backing into it, door-dinging it, etc. ... or, in this case, being a jackhole and pulling the hood pins out, because understandably, it's probably not a common habit for most guys to check to see that their hood pins are still in place before they hop in, crank it, and take off.

In the future, I would recommend either buying some hoodpins that you can tether to the radiator support with cable in such a way that they can't simply be stolen (maybe ugly, but cheap insurance) or start making it a habit to check for the presence of your hood pins every single time you're about to get in your car and go somewhere ... and keep an extra pair of hood pins in the glovebox, just in case some buttnugget does decide to steal the pins again.

Seriously ... I hate people. I really, really, REALLY hate people.
 

ChromdOutDubs

Member
Sep 1, 2005
268
1
18
38
Tavares, Florida
home.comcast.net
Feb 14, 2008
#20
  • Feb 14, 2008
  • #20
Darkwriter77 said:
I'd actually be pretty inclined to believe this theory more than others. It seems a virtual impossibility to ever have a nice car without some a-hole feeling compelled to screw it up for you in some way, either by keying it, backing into it, door-dinging it, etc. ... or, in this case, being a jackhole and pulling the hood pins out, because understandably, it's probably not a common habit for most guys to check to see that their hood pins are still in place before they hop in, crank it, and take off.

In the future, I would recommend either buying some hoodpins that you can tether to the radiator support with cable in such a way that they can't simply be stolen (maybe ugly, but cheap insurance) or start making it a habit to check for the presence of your hood pins every single time you're about to get in your car and go somewhere ... and keep an extra pair of hood pins in the glovebox, just in case some buttnugget does decide to steal the pins again.

Seriously ... I hate people. I really, really, REALLY hate people.
Click to expand...

I am most likely going to do some type of cables for the hood pins, might be ugly but it will save me a lot of time and money if it ever happened again.

-AJ
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
432
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
207
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
580
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
228
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?