Interior and Upholstery Horn Contact help I'm desperate

I have a 1970 ford coupe with a stock column. I found out my horn wasn't working so I took a look at the turn signal switch and found out that the copper horn contact was completely eroded away. I'm including pictures below of the copper contact I'm referring to. I took out the old copper horn contact and have been replacing it with whatever I can find to no avail. I was wondering if anyone knew where to get this copper horn contact/brush from? I cant seem to find one for a 1969-70 model. I just want the copper contact since replacing the entire turn signal switch is around $100. It needs to be a solid rod, I've tried using a wire with a spring attached but the wire is flimsy and folds over when I turn the wheel which just causes a short and my horn to go off for the entire ride.

Any help at all would be a huge help, Thanks!

wicked93gs said:

Short of replacing the entire switch assembly I don't think you are going to find just the contact. That being said, I have an old junk switch for a '66 you can have for the cost of shipping. That contact looks like the '66...probably the same thing. Not sure what is involved in swapping it over though.

Click to expand...

I saw the 66 contact online, the top "brush part" looks sorta flimsy since its just a wire connected to a spring. The problem is I made something similar to it but it just folded over somehow and created a short when I turned my wheel. Thanks for the offer though! Thats really kind of you.