• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Horsepower Question

  • Thread starter Thread starter 885.0conv
  • Start date Start date Sep 1, 2008
8

885.0conv

Member
Jan 9, 2008
238
0
16
Phoenix, Az
Sep 1, 2008
#1
  • Sep 1, 2008
  • #1
I was curious about the est hp I would have with adding the following so I can calculate the right injectors I need.

Adding

73 mm C&L calibrated for the size
70 mm TB
70 mm spacer
edelbrock performer intake
trickflow twisted wedge heads w/1.6 roller rockers
 

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
4,061
3,133
204
Middle of Maine
Sep 1, 2008
#2
  • Sep 1, 2008
  • #2
With those parts you would be somewhere in the 300 h.p. range + or - 25 h.p. You could still use the stock injectors with this combo. But I would go with at least a 24 lb/hr injector, or 30 lb/hr. My reason would be that it would give me room to grow, if later I were to add more h.p. Then at least I would not have to buy injectors again and a new or re-calibrated MAF.
 

Dino Dino Bambino

15 Year Member
Jun 13, 2007
1,673
90
79
Cyprus
Sep 1, 2008
#3
  • Sep 1, 2008
  • #3
24lb injectors would suffice with that combo but if you decide to build a 331 or 347 stroker later on or add forced induction, you could get bigger injectors and have their duty cycle reduced by a custom EEC tune. This will give you the fuelling you need now and have room to grow later.
 
8

885.0conv

Member
Jan 9, 2008
238
0
16
Phoenix, Az
Sep 1, 2008
#4
  • Sep 1, 2008
  • #4
I plan to add a supercharger with 8 lbs of boost with a cam but that will be down the road. Will the stock drivetrain handle that power or will I need to upgrade that as well. I will not be driving constantly at the track just a little flooring now and then onto the highway.
 

Dino Dino Bambino

15 Year Member
Jun 13, 2007
1,673
90
79
Cyprus
Sep 2, 2008
#5
  • Sep 2, 2008
  • #5
You'll need a built AOD with higher rpm stall torque converter and 31 spline axleshafts. Plan on further upgrades to the suspension, brakes, and chassis (subframe connectors).
 

bynummustang

Seen my other Jackstand?
Jul 24, 2005
1
2
69
NC State University
Sep 2, 2008
#6
  • Sep 2, 2008
  • #6
I would personally go find a set of 24 lb injectors. 24's will work fine even if you run a stroker. The amount of money you'll spend on the blower, a few extra bucks on new (injector and o-rings) would be minimal.

As for the tranny and such, 31 spline axles, and a TKO with the supporting parts should be good.


Or, built AOD, didn't see that you were auto. I'd go with a 3200 or something stall if you plan on making good hard passes at the strip, but still street worthy.
 
You must log in or register to reply here.

Similar threads

D
N/A build on fresh stock 302
  • djcarrot
  • Oct 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
442
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2026
AeroCoupe
C
Dyno day! # guesses?
  • clayton seiders
  • Aug 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
638
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 16, 2025
Scrapla347
H
turbo advice
  • hawkinsdrag
  • May 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
639
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 9, 2025
hoopty5.0
First Car, what should I do for power??
  • tunedV6
  • Apr 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
453
1996 - 2004 SN95 Mustang -General/Talk- May 4, 2026
580HP*428Cj
5
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
837
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?