How big is the Nut in the Center of the Balancer

[HISSIN50]

I can't remember myself. A tell: when you retard the timing (what you want to do), the idle will go down. Just be sure to make a mark where you have the timing set now (just a sharpie mark on the dizzy and lower intake works) if you dont have a timing light. That way you can hose around with the dizzy and get it back to where you are now.

Good luck Dan.

 

[Danman765432]

Thanks everyone for putting up with my ****...throughout this post i was frustrated so some of the stuff may have not made sense. Thanks again

 

[gcomfx.com]

Just to let you know... never try to pull your Power Steering Pulley off. I just pulled mine last night. I used an impact AND it was still tough.

 

[Danman765432]

haha...yeah well its just not my week or few days...when I was about to chaning the timing...my timing light broke so...yeah...I know it is at 16 but there is not detenation but I still want to bump it down to 10 since I will be running the nitrous in like 2 weeks. Plus I am still pretty cautious about the whole install and everything....When i took it for a little ride before to see if it was working ok, I noticed a big difference from having underdrive pulleys to me putting the stock ones back on now. The car doesnt rev as fast as it normally would.

 

[Danman765432]

Everything is fixed and the timing is at 10 so we are all good to go...now next thing is finishing the nitrous and installing the gauges...that stuff i can do easily.

 

[gcomfx.com]

Everything is fixed and the timing is at 10 so we are all good to go...now next thing is finishing the nitrous and installing the gauges...that stuff i can do easily.

If all goes well.... be prepared to have a chit eatin' grin on your face for a couple of days.