how do i remove factory stereo?? not mach

Yeah, the pinholes are gone on that year... A Haynes manual will show you the way. Or you could probably google for it

get a panel removal tool or flat head screw driver and pop up the bezel around the shifter (or stick your hands under the shift boot and pull up, just be gentle)

once you get that off, pull forward on the rest of the dash bezel that goes around the A/C and actual radio.

unplug the switches like the fog lights, and rear defroster etc, if you want.

then the radio is held in by two 7 or 8 MM screws i forget which, and there ya go. good luck