How does this sound???

[f6cobra]

XE274hr cam with windsor jr. heads. 1.7 ratio rockers. MAF conversion. 3.73 gears. 5-spd. Cold air induction. Upper and lower intakes will becoming after the cam and heads are done. Does this sound like it will work. Anyone tried this cam or know if its good. Also what degree should I set this thing at when I put it in? Thank you.

cam specs (if you dont know) are:
.555/.565 lift and 274 duration.

 

[DropTopR]

Don't the Windsor Jr's run 2.02 valves? If so, you're pistons will have a nice meeting with them if they are stock pistons. My cam/heads are a similar setup, and I had to get new pistons.

 

[f6cobra]

No. Actually they are 1.94/1.60 valve size. You still see this being a problem. Oh yeah they are stock pistons. I figure out one thing about a camshaft and pick that one and then realize its not the right one! Help!

 

[SmockDoiley]

didnt see a windsor jr on Edelbrocks site but I did see the Victor jr and they were much larger than 1.94.

 

[f6cobra]

It says 1.94/1.60 in the jegs magazine. the windsor SR. are 2.02/1.60 but I have the jr's. Any input would be great

 

[remat457]

according to a catalog I have it shows the Jr's with 1.940" / 1.600" too

 

[noslow5_0]

yup go to world products home page... do a search on google for them... i have the same heads, and found out all the info about them an more a few weeks ago... Good luck!!! i guess this is just a bump for ya...